Máy đo độ cứng Rockwell Versitron BT130R/BT130R/AT130N/AT130T

Xem thêm hình ảnh phụ kiện ở DataSheet

AT/5309 Diamond Spot Anvil Provides controlled deformation for testing soft or thin metals where the anvil effect is assumed.
AT/5310 2” Diameter Flat Anvil For testing of parallel face specimens.
AT/5311 Spot Anvil For testing against small areas or confined spaces.
AT/5312 Shallow Vee Anvil For testing small cylindrical specimens.
AT/5313 Wide Vee Anvil For testing cylindrical specimens.
AT/5318 Set of 3 Small Anvils For small parts testing. Includes flat, spot, and round anvils and anvil adapter.
AT/5319 Flattened Vee Ball Anvil Test parts with tapered or non-parallel faces can be tested quickly and accurately with this anvil. The flat face is rotated to take up the taper on the underside of the test piece, while the test surface is clamped perpendicular to the indenter.
AT5319V Flattened Ball Anvil with vee for testing tapered rounds.
AT/5322 Anvil Adapter to fit 3/4” post diameter anvils Standard or special anvils built for conventional hardness testers can be adapted to the Versitron® by reducing the spindle hole diameter.
AT/5510 Flexible Arm Electric Light With on-off switch, holding fixture, 115V transformer, and a power cord.
AT/5535 Audible Alarm A loud signal for out-of-tolerance conditions. For DS model test heads only. (Must be ordered at time of test head purchase.)
9011 8” Anvil Table Circular 8” dia. work surface to support large test pieces
9012 Jominy Test Fixture Enables end quench testing at specified intervals along the axis of a Jominy test piece. The test specimen is securely held in proper alignment. The hand wheel controls test positioning. The base is graduated at 1/16” or 1 mm intervals, specify with order.
AT/5620 Vinyl Protective Cover
AT/5324 Adjustable Cylinder Vee Anvil With two positions.
AT130B Floor Cabinet To mount any bench model. A hole is drilled for the elevating screw. Includes an area for test blocks, anvils, etc.