Máy hiện sóng, Oscilloscope LeCroy HRO 64Zi 400 MHz, 4 CH

Name: Máy hiện sóng, Oscilloscope LeCroy HRO 64Zi 400 MHz, 4 CH
Brand: LeCroy
SKU: HRO 64Zi
Price: 0VND VND
Availability: InStock
Rating: 0.00 (0 reviews)

Mã:

HRO 64Zi

0 đánh giá

Thương hiệu:

LeCroy

Bảo hành:

N/A

Giá: Liên hệ

Vui lòng liên hệ để kiểm tra tình trạng kho

Yêu cầu báo giá

Tạm thời chưa có khuyến mãi cho sản phẩm này

Hotline: 0906.988.447

Liên hệ: Hồ Chí Minh

Điện thoại: (028).3977.8269
Email: sales@lidinco.com
Địa chỉ: 487 Cộng Hòa, Phường 15, Quận Tân Bình, TP. HCM

Liên hệ: Bắc Ninh, Hà Nội

Điện thoại: (0222).730.0180
Email: bn@lidinco.com
Địa chỉ: 184 Bình Than, Phường Võ Cường, TP. Bắc Ninh

Tư vấn kĩ thuật Miễn phí
Miễn phí vận chuyển Đơn hàng trên 3 triệu

Thông số kỹ thuật

Dữ liệu đang được cập nhật

Mô tả sản phẩm
Phụ kiện

Giới thiệu

Máy hiện sóng LeCroy DRO64Zi băng thông 400 MHz, lấy mẫu 2 GSa/s, 4 kênh, bộ nhớ 16 Mpts/kênh, màn hình 12.1 inch.

High Resolution Oscilloscopes HRO 64Zi and HRO 66Zi, 400MHz and 600MHz models

The world's clearest and lowest-noise Oscilloscopes are the new HRO models from Teledyne LeCroy. Teledyne LeCroy's High Resolution Oscilloscopes combine true 12-bit ADC's and newly designed low-noise front ends to deliver unmatched signal fidelity. From the crisp, ultra-thin traces to the blazing update speed and responsiveness, Teledyne LeCroy HRO models provide a shocking contrast to traditional 8-bit oscilloscopes.

Superior Validation, Debug, Analysis

Teledyne LeCroy HRO models contain a powerful feature set which includes a wide range of application packages, advanced triggering to isolate events, a user interface developed for quick and easy navigation, a wide range of probing options, and lightning-fast performance.

Excellent Signal Fidelity

The Teledyne LeCroy HRO family features a pristine signal acquisition architecture that offers unmatched signal fidelity with low noise. This performance is augmented by a huge offset and timebase delay adjustment to allow easy signal and amplifier performance assessment and zooming on vertical and horizontal signal characteristics.

A New Way to Navigate and View

The WavePilot control area provides convenient control of Cursors, Decode, WaveScan, History, LabNotebook, and Spectrum by their respective function buttons on the front panel.

The SuperKnob is a joystick-like knob in the center of the WavePilot control area used to easily navigate through tables, zoom and position waveforms, and quickly document and annotate your setups.

Simply slide the button on the left side of the display and rotate upwards 90º. The display will automatically change from landscape to portrait mode. The display will also pivot upwards and downwards to optimize viewing angle.

More Trigger Capability Isolates More Problems More Quickly

A powerful combination of high bandwidth edge and 10 different SMART triggers, four stage cascade triggering, measurement trigger, and TriggerScan are all standard and allow you to isolate the problem quickly and begin focus on the cause. The measurement trigger offers a powerful option to qualify a trigger event based on a qualified measurement with great resolution.

Rotating Display

The 12.1" high resolution WXGA wide screen is designed to provide the best view of any signal type on the display.

The widescreen is ideal for a variety of signals where long records are required and zooming or scrolling results in a large block of data.

Rotate the screen 90° degrees to optimize the display for viewing digital signals, jitter tracks, eye diagrams, and frequency plots. The screen image will adjust automatically when rotated. Tilt the display up or down in either orientation to minimize reflections or glare.

Vertical System
Bandwidth	400 MHz
Analog Bandwidth (Max)	400 MHz
Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input)	400 MHz (≥1 mV/div)
Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input)	400 MHz (typical)
Rise Time (10-90%, 50 Ω)	875 ps (typical)
Rise Time (20-80%, 50 Ω)	650 ps (Typical)
Input Channels	4
Bandwidth Limiters	20MHz,100 MHz, 200MHz
Input Impedance	50 Ω+/-2% or 1 MΩ\|\|17pF, 10 MΩ \|\| 17 pF with supplied Probe
Input Coupling	1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Maximum Input Voltage	50 Ω: 5V RMS ± 10V peak 1 MΩ: 400 V max. (DC + peak AC < 10 kHz)
Channel-Channel Isolation	DC-400MHz > 1000:1; 400MHz up to rated BW > 300:1
Vertical Resolution	12 bits; up to 15 bits with enhanced resolution (ERES)
Sensitivity	50 Ω: 1 mV-1 V/div, fully variable; 1 MΩ: 1 mV-10 V/div, fully variable
DC Gain Accuracy	±(0.5%) F.S, offset at 0 V
DC Vertical Gain Accuracy (Gain Component of DC Accuracy)	±(0.5%) F.S, offset at 0 V
Offset Range	50 Ω: ±1.6 V @ 1 mV - 4.95 mV ±4 V @ 5mV - 9.9 mV ±8 V @ 10mV - 19.8 mV ±10 V @ 20mV - 1V 1 MΩ: ±1.6 V @ 1 mV - 4.95 mV ±4 V @ 5mV - 9.9 mV ±8 V @ 10mV - 19.8 mV ±16 V @ 20mV - 100 mV ±80 V @ 102mV - 198 mV ±160 V @ 200mV - 1V ±400V @ 1.02 V-10 V/div
Offset Accuracy	±(1% of offset setting +0.2% of full scale + 0.02% max offset + 1 mV)
DC Vertical Offset Accuracy	±(1% of offset setting + 0.2% F.S. + 0.02% max offset + 1 mV)

Horizontal System
Timebases	Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
Time/Division Range	20 ps/div - 12.8 ks/div with standard memory (up to 25.6 ks/div with -L memory, 51.2 ks/div with -XL memory) RIS available at ≤ 10 ns/div; Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s.
Clock Accuracy	<=1ppm +(aging of 0.5ppm/yr from last calibration)
Trigger and Interpolator Jitter	≤ 6 ps RMS (typical) <0.1 ps RMS (typical, software assisted)
Channel-Channel Deskew Range	±9 x time/div. setting, 100 ms max., each channel
External Timebase Reference (Input)	10MHz +/-25ppm via Lbus BNC adaptor
External Timebase Reference (Output)	10MHz, 3.5 dBm +/-1dBm, syncronized to reference being used (internal or external reference) via LBUS BNC adaptor
External Clock	DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies.

Acquisition System
Single-Shot Sample Rate/Ch	2 GS/s on 4 Ch
Random Interleaved Sampling (RIS)	100 GS/s for repetitive signals (20 ps/div to 10 ns/div)
Maximum Trigger Rate	500,000 waveforms/second (in Sequence Mode, up to 4 channels)
Intersegment Time	2 µs
Maximum Acquisition Memory	256 Mpts (4 Ch operation)
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments)	64M / 64M / 64M (30,000)
Memory Options (4 Ch / 2 Ch / 1Ch) (Number of Segments)	L-128 Option: 128M / 128M / 128M (60,000) XL - 256 Option: 256M / 256M / 256M (65,000)

Acquisition Processing
Averaging	Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Enhanced Resolution (ERES)	From 12.5 to 15 bits vertical resolution
Envelope (Extrema)	Envelope, floor, or roof for up to 1 million sweeps
Interpolation	Linear or Sin x/x

Triggering System
Modes	Normal, Auto, Single, and Stop
Sources	Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger)
Coupling Mode	DC, AC, HFRej, LFRej
Pre-trigger Delay	0-100% of memory size (adjustable in 1% increments of 100 ns)
Post-trigger Delay	0-10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
Hold-off by Time or Events	From 2 ns up to 20 s or from 1 to 99,999,999 events
Internal Trigger Range	±4.1 div from center (typical)
Trigger Sensitivity with Edge Trigger ProBus Inputs	2 div @ < 400 MHz 1.5 div @ < 200 MHz 0.9 div @ <10 MHz (DC, AC, and LFRej coupling, ≥ 10 mV/div, 50 Ω)
External Trigger Sensitivity, (Edge Trigger)	2 div @ < full Bandwidth 1.5 div @ < 300 MHz 1 div @ <200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling)
Max. Trigger Frequency, SMART Trigger	400 MHz @ ≥ 10 mV/div (minimum triggerable width 1.9 ns)
External Trigger Input Range	Ext (±0.4 V); Ext/10 (±4 V)

Basic Triggers
Edge	Triggers when signal meets slope (positive, negative, or either) and level condition.
Window	Triggers when signal exits a window defined by adjustable thresholds
TV-Composite Video	Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).

SMART Triggers
State or Edge Qualified	Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Qualified First	In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
Dropout	Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern	Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don?t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.

SMART Triggers with Exclusion Technology
Glitch	Triggers on positive or negative glitches with selectable widths. minimum width 1.5ns, Maximum Width: 20s
Width (Signal or Pattern)	Triggers on positive or negative glitches with selectable widths. minimum width 1.5ns, Maximum Width: 20s
Interval (Signal or Pattern)	Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified)	Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt	Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate	Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Exclusion Triggering	Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met

Cascade (Sequence) Triggering
Capability	Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event.
Types	Cascade A then B: Edge, Window, Pattern (Logic) Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage B only. Cascade A then B then C (Measurement): Edge, Window, Pattern (Logic), Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage C only. Cascade A then B then C: Edge, Window, Pattern (Logic)
Holdoff	Holdoff between A and B or B and C is selectable by time (1ns to 20s) or number of events. Measurement trigger selection as the last stage in a Cascade precludes a holdoff setting between the prior stage and the last stage.

Low Speed Serial Protocol Triggering (Optional)
Optionally available	I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay, MIL-STD-1553, USB 1.x/2.0, AudioBus

Measurement Trigger
Measurement Trigger Capability	Select from a large number of measurement parameters trigger on a measurement value with qualified limits. Can be used as only trigger or last event in a Cascade Trigger.

Color Waveform Display
Type	Color 12.1" widescreen flat panel TFT-Active Matrix with high resolution touch screen
Resolution	WXGA; 1280 x 800 pixels.
Number of traces	Display a maximum of 16 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles	Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
Waveform Representation	Sample dots joined, or sample dots only

Internal Waveform Memory
Internal Waveform Memory	4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.

Integrated Second Display
Type	Supports touch screen integration of user-supplied second display with split-grid capability.
Resolution	(Note: touch screen driver for second display may not be a Fujitsu driver)

LeCroy WaveStream™ Fast Viewing Mode
Intensity	256 Intensity Levels, 1-100% adjustable via front panel control
Types	Select analog or color-graded
Number of Channels	up to 4 simultaneously
Max Sampling Rate	2 GS/s
Persistence Aging	Select from 500 ms to Infinity
Waveforms/second (continuous)	up to 2500 Waveforms/second
Operation	Front panel toggle between WaveStream ON (Analog), ON (Color) and OFF

Analog Persistence Display
Analog and Color-Graded Persistence	Variable saturation levels; stores each trace?s persistence data in memory
Persistence Types	Select analog, color, or three-dimensional
Trace Selection	Activate persistence on all or any combination of traces
Persistence Aging	Select from 500 ms to infinity
Sweep Display Modes	All accumulated, or all accumulated with last trace highlighted

Processor/CPU
Type	Intel Core i5, 2.5 GHz (or better)
Processor Memory	4 GB standard
Operating System	Microsoft Windows® 7 Pro 64 bit Embedded
Real Time Clock	Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.

Zoom Expansion Traces
Zoom Expansion Traces	Display up to 8 Zoom and 8 Math/Zoom traces

Setup Storage
Front Panel and Instrument Status	Store to the internal hard drive, over the network, or to a USB-connected peripheral device.

Interface
Remote Control	Via Windows Automation, or via LeCroy Remote Command Set
Network Communication Standard	VXI-11 or VICP, LXI Class C (v1.2) Compliant
GPIB Port	Supports IEEE - 488.2 (External)
Ethernet Port	Supports 2 10/100/1000BaseT Ethernet interface (RJ45 ports)
USB Ports	Minimum 6 total (incl. 2 front panel) USB 2.0 ports support Windows compatible devices
USB Device Port	1 USBTMC port
External Monitor Port	15 pin D-Type WXGA compatible DB-15 to support customer-supplied external monitor. Includes support for extended desktop operation with WXGA resolution on second monitor.
Peripheral Bus	LeCroy LBUS standard

Auxiliary Input
Signal Types	Select External Trigger or External Clock Input on the front panel
Coupling	50 Ω: DC; 1 MΩ: AC, DC, GND
Max. Input Voltage	50 Ω: 5 Vrms; 1 MΩ: 400 Vmax (DC + Peak AC ≤ 5 kHz)

Auxiliary Output
Signal Types	Select from control signals or Off
Output Signal	500 Hz-1 MHz square wave or DC level; 50 mV-1 V into 1 MΩ
Control Signals	Trigger enabled, trigger out, pass/fail status, off
Connector Type	BNC, located on rear panel

Automatic Setup
Auto Setup	Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
Find Vertical Scale	Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range

General
Auto Calibration	Ensures specified DC and timing accuracy is maintained for 1 year minimum.

Probes
Probes	Qty. (4) ÷10 Passive Probes
Probe System	Probus. Automatically detects and supports a variety of compatible probes
Scale Factors	Automatically or manually selected depending on probe used
Calibration Output	Default is 1kHz square wave, 1Vp-p (typical), output to probe hook. Settable from 250 Hz to 1 MHz square wave; 50 mV to 1.0V.

Power Requirements
Voltage	100-240 VAC ±10% at 45-66 Hz; 110-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection; Installation Category 300 V CAT II
Max. Power Consumption	425 VA

Environmental and Safety
Temperature (Operating)	+5 °C to +40 °C
Temperature (Non-Operating)	-20 °C to +60 °C
Humidity (Operating)	5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
Humidity (Non-Operating)	5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating)	Up to 10,000 ft. (3048 m) at or below +25 °C
Altitude (Non-Operating)	Up to 40,000 ft. (12,192 m)
Random Vibration (Operating)	0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
Random Vibration (Non-Operating)	2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
Functional Shock	30 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total

Physical Dimensions
Dimensions (HWD)	11.69"H x 16.46"W x 8.94"D (297 x 418 x 227 mm)
Weight	25.2 lbs. (11.43 kg)
Shipping Weight	38.8 lbs. (17.6 kg)