Automatic Calibration Module (ACM) 8000T

Module phân tích tín hiệu vector Planar ACM 800T hoạt động tự động và lưu trữ dữ liệu qua ACM memory, thông qua phần mềm được tích hợp 

ACM8000T is an Automatic Calibration Module (ACM) designed for full one-port and two-port calibrations of vector network analyzers from Copper Mountain Technologies. It operates in the frequency range from 300 kHz to 8 GHz.  
 

For lower frequencies, the ACM6000T operates up to 6 GHz. 

The ACM calibrates any CMT VNA in fully automatic mode through the built-in functions of the analyzer software. The ACM switches to the impedance states one by one in the process of calibration. The VNA calibration coefficients are calculated using the measured S-parameters of the ACM impedance states and the data stored in the ACM memory.

Advantages of Automatic Calibration 
The ACM calibration offers the following advantages over traditional mechanical SOLT calibration:

• Reduced number of connections (for example, full two-port calibration requires only one connection of the ACM to a VNA instead of 7 connections of mechanical standards)
• Faster calibration procedure
• Reduced risk of human error
• Higher accuracy
• Reduced wear on test port connectors  The ACM contains two RF connectors for connection to VNA test ports, Mini-USB control port, several different transmission and reflection impedance states and electronic changeover switches. ACM6000T has six reflection states (three for each port) and a Thru, and ACM8000T has ten reflection states (five for each port) and a Thru. The precise S-parameters of the calibration impedance states are stored in the ACM memory (factory characterization data). Basic configuration options for ACM6000T are below. For more information on ACM configurations and specifications, please see the data sheet at right. 
  ACM8000T (300 kHz to 8 GHz): 
• N-Type M-F
• N-Type F-F
• 3.5mm M-F
• 3.5mm F-F 
  Because the ACM comes in multiple configurations and connectors, we advise you to talk to us to see which one is best for your application. 

ACM8000T (300 kHz to 8 GHz): N-Type M-F, N-Type F-F, 3.5mm M-F, 3.5mm F-F

[caption id="attachment_157665" align="aligncenter" width="497"] Automatic Calibration Module (ACM) 8000T [/caption]