Hệ thống Sạc Pin máy bộ đàm

Hệ thống Sạc Pin máy bộ đàm

Mã:
DURO A
Thương hiệu:
Bảo hành:
N/A
Giá: Liên hệ
  • Loại pin kiểm tra:
  • Vui lòng liên hệ để kiểm tra tình trạng kho
  • Tạm thời chưa có khuyến mãi cho sản phẩm này

Hotline: 0906.988.447

Liên hệ: Hồ Chí Minh

  • Điện thoại: (028).3977.8269
  • Email: sales@lidinco.com
  • Địa chỉ: 487 Cộng Hòa, Phường 15, Quận Tân Bình, TP. HCM

Liên hệ: Bắc Ninh, Hà Nội

  • Điện thoại: (0222).730.0180
  • Email: bn@lidinco.com
  • Địa chỉ: 184 Bình Than, Phường Võ Cường, TP. Bắc Ninh
  • Tư vấn Tư vấn kĩ thuật Miễn phí
  • Giao hàng Miễn phí vận chuyển Đơn hàng trên 3 triệu
Thông số kỹ thuật

Dữ liệu đang được cập nhật

Giới thiệu Hệ thống Sạc Pin máy bộ đàm

Hệ thống Sạc Pin máy bộ đàm 

  • Sạc được nhiều máy bộ đàm cùng lúc
  • Sạc nhanh chóng
  • Hệ thống sạc bền bỉ

A1

DURO A1 SINGLE-BAY BATTERY CHARGER     

 

This compact single-bay charger services lithium and nickel based battery packs. The external 18-watt AC power supply provides 15 watts of charge power per bay. Charge time is 2-3 hours, depending on battery size. 

  • NiCd, NiMH, Li-ion
  • 3.6 - 14.4V batteries
  • 1.5 Amp charge current (up to 15 W per bay)
  • Charge/Ready/Fail LED’s
  • Full charge detection
  • Adapters available
Part Number: 11-403-0100

 

DURO A5 MULTI-BAY BATTERY CHARGER

 

Duro A5

Has a 90-watt external AC power supply to provide 15 watts of charge power per bay. Charge time is 2-3 hours, depending on battery size. 

  • NiCd, NiMH, Li-ion
  • 3.6 - 14.4V batteries
  • 1.5 Amp charge current (up to 15 W per bay)
  • Charge/Ready/Fail LED’s
  • Full charge detection
  • Adapters available
Part Number: 11-403-0500

DURO B1 SINGLE-BAY BATTERY CHARGER

 

Duro B1

Charges SMBus and non-SMBus batteries. A 30-watt external AC power supply provides 27 watts of charge power per bay for a charge time of 2-3 hours on most batteries. 

  • NiCd, NiMH, Li-ion
  • 3.6 - 14.4V batteries
  • 3 Amp charge current (up to 27 W per bay)
  • Charge/Ready/Fail LED’s
  • Full charge detection
  • Adapters available
Part Number: 11-403-0120

 

DURO B5 MULTI-BAY BATTERY CHARGEr

Duro B5

Similar to B1 with 5 bays for simultaneous service of 5 batteries; includes battery calibration & conditioning function on bays 1 and 2. A 150-watt external AC power supply provides 27 watts of charge power per bay. 

  • NiCd, NiMH, Li-ion
  • SMBus & non-SMBus charging
  • 1 Amp discharge current
  • Fuel-gauge calibration & conditioning
  • Prompts user to calibrate when needed
  • Charge/Ready/Fail LED’s
  • Full charge detection
  • 3.6 - 14.4V batteries
  • Adapters available
Part Number: 11-403-0520
 

HOT AND COLD CHARGING

Advanced charge techniques guarantee full state-of-charge and safe operation even under adverse conditions. 

Below 0C (32F), the Duro applies a trickle charge to warm up the nickel-based battery, then switches to fast-charge on reaching operating temperature. A charge time-out timer prevents a prolonged charge at low temperature. For safety reasons, lithium-ion does not charge below 5C (41F).

Above 50C (123F), the Duro allows the battery to cool down to 45C (113F) before taking on a charge or resuming from a previous charge. Should the temperature remain high, a time-out timer terminates the battery with a fail indication. Preventing charge at high temperatures protects battery and equipment and achieves optimal safety.

* Temperature sensing requires a thermistor in the battery or in the adapter

FULL-CHARGE TERMINATION

The termination methods of nickel-based batteries are based on negative delta V, plateau timer and dT/dt. Lithium-ion terminates on a current saturation. Redundant detection methods provide safe charging, even if the battery is known to be defective.

TRI-CHEMISTRY SELECTION

The user often has the choice of utilizing nickel or lithium-based batteries. Duro adapters automatically detect the battery type and select the correct charge algorithm. Nickel and lithium-based batteries can be charged in the same adapter.* 

* Only for batteries with usable identification code

Tri-Chemistry Selection

ACTIVE CHARGE OPERATION

Operators often require monitoring voice traffic while the radio is in the charger. The Duro makes this possible by applying a topping charge after energy has been dispensed. With the Duro charger, a two-way radio can in essence become a base station.Active Charge Operation

SIGNAL INDICATORS

Two light signals indicate charging, ready and fail status. Fail denotes a battery that is shorted, unable to follow the predicted voltage pattern or other anomalies. A fail condition terminates service to protect the battery and charger and alerts the user with a flashing red LED.Signal Indicators

REACTIVATING LITHIUM-ION BATTERIES

When discharged too low, some lithium-ion batteries appear dead and cannot be recharged. The Duro charger recognizes this condition and reactivates the pack’s safety circuit with charge pulses. On reaching normal voltage, a fast-charge completes the charge.Reactivating Lithium-ion Batteries

CONDITIONING / CALIBRATION DISCHARGE

Bay 1 and 2 of the Duro B5 are equipped with discharge circuits. This feature reverses memory on nickel-based batteries and calibrates SMBus packs. Batteries in constant use should be serviced once every 1-3 months to prolong battery life and retain an accurate digital readout. The B5 recognizes the need for calibration by flashing the red LED for 15 seconds.Conditioning and Calibration Discharge

CHARGES SMBUS BATTERIES

The Duro B-system services SMBus batteries by communicating with the internal battery flags and resetting the state-of-charge indicator on full charge.SMBus Batteries

IN-VEHICLE MOUNTING

The Duro chargers can be installed in a vehicle to service 3.6 to 7.2 volts batteries. Higher voltage batteries can be serviced by adding a third-party external DC-to-DC converter. Cadex offers several mounting options that allow horizontal or vertical mounting. Typical charger locations are the transmission hub, firewall, trunk floor and the wall in a truck. The installation is quick and simple.

 

Thông số kỹ thuật

 Duro A1Duro A5Duro B1Duro B5
System1-bay quick-charger for regular batteries5-bay quick-charger for simultaneous charge of 5 batteries1-bay quick-charger for SMBus batteries; also charges regular batteries5-bay quick-charger for simultaneous charge of 5 regular and SMBus batteries
Battery interfaceThe chargers are factory configured for the battery type. Customer specified.
ChemistriesNickel-cadmium (NiCd), nickel-metal-hydride (NiMH) and lithium-ion (Li-ion).
Charge protocolNickel-based: Constant current; charge termination: dT/dt (rate-of-temperature increase); 1°C/min. rise, NDV 8-10mV/cell; plateau timer; trickle charge of 0.05C when ready. Lithium-based: Constant voltage, current limit; charge termination on current drop to 0.05C.
Temperature managementNickel-based: Trickle charge if below 0°C, normal charge when warm Lithium-based: No charge if below 5°C, resumes charge when warm No charge for all chemistries above 50°C; resumes when cooled down to 45°C.
Battery mAh/V500mAh - 8000mAh
Low-V version High- V version3.60 - 7.20V 8.40 - 14.40V3.60 - 7.20V 8.40 - 14.40VSpecial order 9.60 - 14.40VSpecial order 9.60 - 14.40V
Charge timeNickel-based chemistries: 90 minutes typical; longer on larger batteries Lithium-based chemistries: 3h typical; longer on larger batteries
Discharge powerNot availableNot availableNot available1A, 15W max each for bays 1 & 2
Light signalsCharging: Flashing green Ready: Solid green Fail: Solid redSame, red/green discharging; flashing red hint to calibrate
Electrical18 watts external AC power adapter, (90-250 VAC, 47-63 Hz)90 watts external AC power adapter, (90-250 VAC, 47-63 Hz)30 watts external AC power adapter, (90-250 VAC, 47-63 Hz)150 watts external AC power adapter, (90-250 VAC, 47-63 Hz)
Vehicle mountCharges 3.6 - 7.2V batteries from 12VDC vehicular power source
ApprovalsCSA 60950, UL60950, EN 60950 for safety and FCC Part 15 Class A, EN55022 Class A for EMI, and EN61000-3-2, EN61000-3-3 and EN61000-4-2, -3, -4, -5, -6, -11 for EMC. RoHS and WEE compliant
EnvironmentalOperating temperature: 0°C to +40°C (32°F to +104°F) Storage temperature: -30°C to +70C (-22 to +158°F)
Physical
Length Width Height Weight
232.4 mm (9.15”) 127 mm (5”) 57 mm (2.24”) 0.4 kg  (0.88 lb)520.7 mm (20.5”) 232.2 mm (9.14”) 57 mm(2.24”) 3.25 kg  (7.16 lb)232.4 mm (9.15”) 127 mm (5”) 57 mm (2.24”) 0.4 kg  (0.88 lb)520.7 mm (20.5”) 232.2 mm (9.14”) 57 mm(2.24”) 3.25 kg  (7.16 lb)
WarrantyCadex warrants the analyzer against defective materials and workmanship for a period of one (1) year from the original purchase date.

 

Phụ kiện

Hệ thống Sạc Pin máy bộ đàm

Liên hệ

Sạc bộ đàm A5

Liên hệ

Sạc và phục hồi Pin A6

Liên hệ

Máy Kiểm tra Pin Điện Thoại Di Động Cadex C5100B

Liên hệ

Máy kiểm tra Pin Đa Chức Năng Cadex Series C7200 - C7400

Liên hệ

Máy kiểm tra nhanh Acquy Spectro CA-12

Liên hệ

Máy kiểm tra pin Cadex C8000

Liên hệ

Sạc bộ đàm A5

Liên hệ

Sạc và phục hồi Pin A6

Liên hệ
Đánh giá & nhận xét

0.0/5

(0 đánh giá)
  • 5 0
  • 4 0
  • 3 0
  • 2 0
  • 1 0

Vui lòng đăng nhập để viết đánh giá!

Đánh giá của bạn về sản phẩm này: