Nguồn một chiều (DC) keithley 2306

Nguồn một chiều (DC) keithley 2306

Mã:
2306
Thương hiệu:
Bảo hành:
N/A
Giá: Liên hệ
  • Phân loại nguồn DC:
  • Số ngõ cấp nguồn:
  • Dòng điện đầu ra:
  • Điện áp đầu ra:
  • Vui lòng liên hệ để kiểm tra tình trạng kho
  • Tạm thời chưa có khuyến mãi cho sản phẩm này

Hotline: 0906.988.447

Liên hệ: Hồ Chí Minh

  • Điện thoại: (028).3977.8269
  • Email: sales@lidinco.com
  • Địa chỉ: 487 Cộng Hòa, Phường 15, Quận Tân Bình, TP. HCM

Liên hệ: Bắc Ninh, Hà Nội

  • Điện thoại: (0222).730.0180
  • Email: bn@lidinco.com
  • Địa chỉ: 184 Bình Than, Phường Võ Cường, TP. Bắc Ninh
  • Tư vấn Tư vấn kĩ thuật Miễn phí
  • Giao hàng Miễn phí vận chuyển Đơn hàng trên 3 triệu
Thông số kỹ thuật

Battery Channel:

*Điện áp đầu ra: 0 to +15V DC

*Dòng điện DC:

Continuos Average Output Current

Channel #2 (Charger) OFF: I = 50W/(Vset channel 1 + 6V); 5A max.
Channel #2 (Charger) ON: I = (50W – Power consumed by channel #2)/(Vset channel 1 + 6V); 5A max.
The power consumed by channel #2 is calculated as:
Channel #2 sourcing current:
Power consumed = (Vset channel 2 + 6V) × (current supplied)
Channel #2 sinking current:
Power consumed = 5 × (sink current)
Peak currents can be a maximum of 5A provided the average current is within the above limits

*Ổn định tải: : 0.01% + 2mV / 0.01% + 1mA

*Ổn định dòng: 0.5mV / 0.5mA

*Độ phân giải: 1mV; 1.25mA

*Kích thước: 89mm high × 213mm wide × 411mm deep (3½ in × 8 3⁄8 in × 16 3⁄16 in).

*Trọng lượng: 3.2kg (7.1 lbs)

Giới thiệu Nguồn một chiều (DC) keithley 2306

Nguồn DC    keithley 2306, hai ngõ ra tùy chỉnh   

Keithley 2306   

Thông tin sản phẩm:   

  • Ultrafast response to transient load currents   
  • Choice of single- or dual-channel supplies   
  • Optimized for development and testing of battery-powered devices   
  • Variable output resistance for simulating battery response (U.S. Patent No. 6,204,647)   
  • Pulse peak, average, and baseline current measurements   
  • 100nA DC current sensitivity   
  • Current step measure function   
  • Sink up to 3A   
  • Open sense lead detection   
  • Built-in digital voltmeter   

 Thông số kỹ thuật   

GENERAL SPECIFICATIONS
ISOLATION (low–earth)22VDC max
PROGRAMMINGIEEE-488.2 (SCPI)
USER-DEFINABLE POWER-UP STATES8-position quick disconnect terminal block for output (4), sense (2), and DVM (2)
TEMPERATURE COEFFICIENT (outside 23°C ±5°C)Derate accuracy specification by (0.1 × specification)/°C
OPERATING TEMPERATURE0° to 50°C (Derate to 70%). 0° to 35°C (Full power)
STORAGE TEMPERATURE–20° to 70°C.
HUMIDITY<80% @ 35°C non-condensing.
DISPLAY TYPE2-line × 16 character VFD
REMOTE DISPLAY/KEYPAD OPTIONDisables standard front panel
DIMENSIONS89mm high × 213mm wide × 411mm deep (3 1 / 2 in × 8 3 / 8 in × 16 3 / 16 in)
NET WEIGHT3.2kg (7.1 lbs)
SHIPPING WEIGHT5.4kg (12 lbs)
INPUT POWER100–120VAC/220–240VAC, 50 or 60Hz (auto detected at power-up)
POWER CONSUMPTION150VA max
WARRANTYTwo years parts and labor on materials and workmanship
EMCConforms with European Union Directive directive 89/336/EEC, EN 55011, EN 50082-1, EN 61000-3-2 and 61000-3-3, FCC part 15 class B
SAFETYConforms with European Union Directive 73/23/EEC, EN 61010-1
AC LINE LEAKAGE CURRENT450µA @ 110VAC, typ.; 600µA @ 220V, type
RELAY CONTROL PORT4-channel, each capable of 100mA sink, 24V max. Total port sink capacity (all 4 combined) is 250mA max. Accepts DB-9 male plug
ACCESSORIES SUPPLIEDUser and service manual, output connectors mating terminal (part no. CS-846)
ACCESSORIES AVAILABLEModel 2304-DISPRemote LCD Display/Keypad (4.6 in × 2.7 in × 1.5 in). Includes 2.7m (9 ft) cable and rack mount kit

 

DC VOLTAGE OUTPUT (2 YEARS, 23°C ± 5°C)
OUTPUT VOLTAGE0 to +15VDC
OUTPUT ACCURACY±(0.05% + 3mV)
PROGRAMMING RESOLUTION1mV
READBACK ACCURACY±(0.05% + 3mV)
READBACK RESOLUTION1mV
OUTPUT VOLTAGE SETTLING TIME5ms to within stated accuracy
LOAD REGULATION0.01% + 2mV
LINE REGULATION0.5mV
STABILITY0.01% + 0.5mV
MEASUREMENT TIME CHOICES0.01 to 10 PLC 7 , in 0.01PLC steps
AVERAGE READINGS1 to 10
READING TIME31ms, typical
READBACK ACCURACY High BandwidthLow Bandwidth
Transient Recovery Time<40µs or <60µs<80µs or <100µs
Transient Voltage Drop<75mV or <100mV<250mV or <400mV
REMOTE SENSE1V max. drop in each lead. Add 2mV to the voltage load regulation specification for each 1V change in the negative output lead due to load current change. Remote sense required. Integrity of connection continually monitored. If compromised, output will turn off automatically once settable window (±0 to ±8 volts) around normal voltage exceeded.

 

VARIABLE OUTPUT IMPEDANCE
RANGE0 to 1.00? in 0.01? steps. Value can be changed with output on

 

DC CURRENT (2 Years, 23°C ± 5°C)
OUTPUT CURRENT0–4V5A max
>4VI MAX = 60W/(V OUT +6) (not intended to be operated in parallel)
SOURCE COMPLIANCE ACCURACY±(0.16% + 5mA)
PROGRAMMED SOURCE COMPLIANCE RESOLUTION1.25mA
READBACK ACCURACY5A Range±(0.2% + 200µA)
5mA Range±(0.2% + 1µA)
READBACK RESOLUTION5A Range100µA
5mA Range0.1µA
CURRENT SINK CAPACITY0–5V3A max
5V–15VDerate 0.2A per volt above 5V. Compliance setting controls sinking
LOAD REGULATION0.01% + 1mA
LINE REGULATION0.5mA
STABILITY0.01% + 50µA
MEASUREMENT TIME CHOICES0.01 to 10 PLC , in 0.01PLC steps
AVERAGE READINGS1 to 10
READING TIME31ms, typical

 

PULSE CURRENT MEASUREMENT OPERATION
TRIGGER LEVEL5A Range5mA to 5A, in 5mA steps
1A Range1mA to 1A, in 1mA steps
100mA Range0.1mA to 100mA, in 100µA steps
TRIGGER DELAY0 to 100ms, in 10µs steps
INTERNAL TRIGGER DELAY15µs
HIGH/LOW/AVERAGE MODEMeasurement Aperture Settings33.3µs to 833ms, in 33.3µs steps
Average Readings1 to 100
PULSE CURRENT MEASUREMENT ACCURACY 11 (2 Years, 23°C ±5°C)APERTUREACCURACY ±(% reading + offset + rms noise 10 )
<100 µs0.2% + 900 µA + 2 mA
100 µs – 200 µs0.2% + 900 µA + 1.5mA
200 µs – 500 µs0.2% + 900 µA + 1 mA
500 µs – <1 PLC0.2% + 600 µA + 0.8mA
1 PLC0.2% + 400 µA + 0 mA
>1 PLC0.2% + 400 µA + 100 µA

 

PULSE CURRENT MEASUREMENT OPERATION
MEASUREMENT APERTURE33.3µs
CONVERSION RATE3650/second, typical
INTERNAL TRIGGER DELAY15µs
NUMBER OF SAMPLES1 to 5000
TRANSFER SAMPLES ACROSS IEEE BUS IN BINARY MODE4800 bytes/s, typical

 

LONG INTEGRATION MODE CURRENT MEASUREMENT
MEASUREMENT TIME850ms (840ms) to 60 seconds in 1ms steps

 

DIGITAL VOLTMETER INPUT (2 Years, 23°C ± 5°C)
INPUT VOLTAGE RANGE–5 to +30VDC
INPUT IMPEDANCE2M? typical
MAXIMUM VOLTAGE (either input terminal) WITH RESPECT TO OUTPUT LOW–5V, +30V
READING ACCURACY±(0.05% + 3mV)
READING RESOLUTION1mV
CONNECTORHI and LO input pair part of Output #1’s terminal block
MEASUREMENT TIME CHOICES0.01 to 10 PLC 7 , in 0.01PLC steps
AVERAGE READINGS1 to 10

Phụ kiện

  • User and service manual
  • output connectors mating terminal (part no. CS-846)

Bộ nguồn lập trình DC Siglent SPD4306X

23.715.000đ

Bộ nguồn lập trình DC Siglent SPD4121X

19.380.000đ

Bộ nguồn lập trình DC Siglent SPD4323X

16.830.000đ

Bộ nguồn DC lập trình Tonghui TH6940-60

Liên hệ

Bộ nguồn DC lập trình Tonghui TH6980-30

Liên hệ

Bộ nguồn DC lập trình Tonghui TH69200-12.5

Liên hệ
Đánh giá & nhận xét

0.0/5

(0 đánh giá)
  • 5 0
  • 4 0
  • 3 0
  • 2 0
  • 1 0

Vui lòng đăng nhập để viết đánh giá!

Đánh giá của bạn về sản phẩm này: