TFG-3510A-lidinco may phat xungTFG-3510A-lidinco may phat xung
Máy phát xung Twintex TFG3605EMáy phát xung Twintex TFG3605E

Máy phát xung, hàm Twintex TFG3510A, 10MHz, 02 kênh

tick sản phẩm Thương hiệu
tick sản phẩm Mã sản phẩm
tick sản phẩm Bảo hành
  Twintex
  TFG3015A
  12 tháng
Để được báo giá nhanh nhất và tốt nhất vui lòng “liên hệ ngay”
√ Hotline:
√ Mail:
√ Form báo giá:
  028.3977.8269 / 028.3601.6797
sales@lidinco.com
  • Mô tả
  • Thông tin bổ sung
  • Thông số kỹ thuật
  • Phụ kiện

Mô tả

Sản phẩm máy phát xung máy phát hàm chuẩn Twintex giá rẻ đáp ứng hầu hết các yêu cầu về nghiên cứu, đo kiểm, sử dụng.

Tần số đầu ra ổn định, đọ chính xác cao và hạn chế độ nhiễu

Các tính năng chính Máy phát xung, hàm Twintex TFG3510A, 10MHz, 02 kênh

★ Max. output frequency 10MHz/20MHz/40MHz

★ 2 output channels

★ 3.5-inch TFT LCD display

★ Direct Digital Synthesis technology (DDS)

★ Minimum output amplitude: 1mV, Maximum resolution: 1μVpp

★ Sampling rate 180MSa/s, vertical resolution 10 bits, waveform length 16000 points

★ 32built-in waveformsand 8 user-defined arbitrary waveforms from CHB

★ 40 sets panel setting save & recall

★ Modulations: FM, AM, FSK, PSK

★ Frequency sweep, amplitude sweep, burst and CHA&CHB Add functions

★ Over voltage protection, over current protection, short circuit protection, reverse voltage protection

★ Numeric keyboard and rotary dial for data input

★ Standard parts: USB interface, RS-232 interface, 200MHz frequency counter

★ Optional parts: power amplifier

TFG-3510A lidincoTFG-3510A lidinco

 

 

Thông tin bổ sung

Hãng SX

Twintex

Model TFG-3510A TFG-3520A TFG-3540A
Frequency range 40μHz~10MHz 40μHz~20MHz 40μHz~40MHz
Waveform (CHA)
Type Sine, Square, Pulse, DC
Length 4~16000 points
Vertical resolution 10 bits
Sampling rate 180MSa/s
Harmonic distortion of sine ≥50dBc (<1MHz); ≥45dBc(1~10MHz); ≥40dBc (10~20MHz); ≥30dBc (>20MHz)
Total distortion of sine ≤0.1% (20Hz~200kHz)
Rise/fall time of pulse &square ≤20ns
Overshoot of pulse & square ≤5%
Duty cycle of square 50.0%
Duty cycle of pulse 1%~99% (≤1MHz)
Frequency (CHA)
Range Sine 40μHz~10MHz 40μHz~20MHz 40μHz~40MHz
Square 40μHz~10MHz 40μHz~20MHz
Pulse 40μHz~10MHz
Internal standard frequency Temperature compensation 26MHz
Resolution 40μHz (40μHz~2kHz); 40mHz (>2kHz)
Accuracy ±(5x10-5+40mHz)
Stability ±1x10-6 /3hours (small TCXO)
Amplitude (CHA)
Range 1mVpp~20Vpp (high impedance)
Resolution 1μVpp (high impedance)
Accuracy ±(1%+1mVrms) (high impedance, RMS, frequency 1kHz)
Stability ±0.5% /3hours
Flatness ±5% (frequency <5MHz); ±10% (frequency 5~10MHz); ±20% (frequency >10MHz)
Output impedance 50Ω
Amplitude setting range of sine

(50Ω)

1mVpp~10Vpp, when output frequency ≤10MHz

1mVpp~7Vpp, when output frequency ≤40MHz

Amplitude setting range

(high impedance)

1mVpp~20Vpp, when output frequency ≤10MHz

1mVpp~14Vpp, when output frequency ≤40MHz

DC Offset (CHA)
Range ±10V (high impedance, attenuation 0 dB)
Resolution 20mVdc
Accuracy ±(1%+20mVdc)
Sweep (CHA)
Parameter Frequency, Amplitude
Range Free to set starting point and end point
Time 100ms~600s
Direction Up, Down, Up-Down
Mode Linearity, Logarithmic
Control Auto sweep or manual sweep
Frequency Modulation (FM) (CHA)
Carrier signal Sineor square, frequency range same as mainsignal
Modulating mode Internal or external
Modulating signal CHB or external signal
Modulating signal frequency Same as CHB signal
FM deviation 0%~20%
External input signal amplitude 20Vpp (-10V~+10V)
External FM Carrier frequency accuracy ≤10-3, modulation error ≤ ±20%
Amplitude Modulation (AM) (CHA)
Carrier signal Sineor square, frequency range same as mainsignal
Modulating mode Internal or external
Modulating signal CHB or external signal
Modulating signal frequency Same as CHB signal
Distortion ≤2%
AM depth 0%~120%
Relative modulating error ≤±5%
External input signal amplitude 20Vpp (-10V~+10V)
Shift Keying (CHA)
FSK Free to set the hop frequency and the carrier frequency
PSK Hop phase: 0~360°, resolution: 11.25°
Control Internal
Alternative rate 10ms~60s
Waveform (CHB)
Type 32 built-in waveforms, including Sine, Square, Triangle, Saw tooth, Ladder, etc.

And 8 user-defined arbitrary waveforms

Length 1024 points
Vertical resolution 8 bits
Sampling rate 100MSa/s
Frequency (CHB)
Range Sine: 10mHz~1MHz; Other: 10mHz~50kHz
Resolution 40mHz
Accuracy ±(1x10-5+40mHz)
Amplitude (CHB)
Range 100mVpp~20Vpp (high impedance)
Resolution 2mVpp
Output impedance 50Ω
Harmonic (CHB)
CHB signal is used as the harmonic signal of CHA
Number of times 0.1~250.0 times
Frequency <1MHz
Phase adjustment 1°/step
Burst (CHB)
CHB signal is used as burst signal
Frequency of CHB 40mHz~1MHz
Burst frequency 10mHz~50kHz
Burst count 1~65000 cycles
Trigger mode Internal, Single, TTL
Frequency counter
Testing frequency range 1Hz~200MHz
Input signal amplitude 100mVpp~20Vpp
Remote Control USB interface, RS-232 interface
General
Operation characteristics Key operation for all functions, Menu display, Rotary dial adjustment
Display TFT LCD
Language English, Chinese (simplified), Chinese (traditional)
Power source AC110V/220V±10% selectable, 50/60Hz, Max. 45VA
Environmental condition 0~40℃,<80%RH
Standard accessories Power cord x1, Operation manual x1, Software CD x1, USB cable x1, RS-232 cable x1, BNC-BNC cable x1, Test lead x1
Dimension 385x260x110mm
Weight 4kg

Các phụ kiện đi kèm máy này

Đang cập nhập