Keysight 33521B

Máy phát xung, hàm Keysight 33521B, 01 channel, 30MHz, Arb

tick sản phẩm Thương hiệu
tick sản phẩm Mã sản phẩm
tick sản phẩm Bảo hành
  12 tháng
Để được báo giá nhanh nhất và tốt nhất vui lòng “liên hệ ngay”
√ Hotline:
√ Mail:
√ Form báo giá:
  028.3977.8269 / 028.3601.6797
  • Mô tả
  • Thông số kỹ thuật

Mô tả

Máy phát xung, máy tạo  hàm  Arbitrary Function Generator Keysight 33521B, 01 channel, 30Mhz with Arb

Thông tin sản phẩm:

Keysight 33519B 30 MHz, 1-Channel, Waveform Generatortrueform


Get the capability, fidelity and flexibility you need to characterize your components and designs with confidence
33500B Series waveform generators with exclusive Trueform signal generation technology offer more capability, fidelity and flexibility than traditional DDS generators. Use them to accelerate your development process from start to finish.
 Revolutionary advances over traditional DDSTrueform Technology 
Generate true point-by-point arbitrary waveforms with less jitter, more fidelity and greater resolution.

Over the past two decades, direct digital synthesis (DDS) has been the waveform generation technology of choice in function generators and economical arbitrary waveform generators. DDS enables waveform generators with great frequency resolution, convenient custom wave-forms, and a low price.As with any technology, DDS has intrinsic downsides and limitations as well. Engineers with exacting requirements have had to either work around the compromised performance or spend up to 10 times more for a high-end, point-by-point waveform generator. 
Agilent’s Trueform technology offers a new alternative that blends the best of DDS and point-by-point architectures, giving you the benefits of both without the limitations of either. Trueform technology uses an exclusive digital sampling technique that delivers unmatched performance at the same low price you are accustomed to with DDS.  The table below highlights the revolutionary capabilities of Trueform technology.
25 MHz
30 MHz 33511B
Edge jitter 500 ps 40 ps 12x better
100% point
0.2% 0.04% 5x better
Must provide
No anti-aliasing
Not possible Standard Easily create
complex wave-
form sequences
  • Easily generate the full range of signals you need for the most demanding measurements 
  • Test your devices with confidence that the waveform generator is outputting the signals you expect
  • Select just the capabilities you need now, then upgrade easily when your needs change


Datasheet download here:  33519B datasheet

Unless otherwise stated, all specifications apply with a 50 Ω resistive load and auto range ON.
Instrument characteristics
Models & options
33509B/11B/19B/21B 1-channel
33510B/12B/20B/22B 2-channel
Option MEM Increases arbitrary waveform memory to 16 MSa/channel*
Option OCX OCXO timebase for ultra-high stability
Option IQP IQ player (Only available on 33512B and 33522B)
Standard Sine, square, ramp, pulse, triangle, Gaussian noise,
PRBS (Pseudorandom Binary Sequence), DC
Built-in arbitrary* Cardiac, exponential fall, exponential rise, Gaussian pulse,
Haversine, Lorentz, D-Lorentz, negative ramp, sinc
User-defined arbitrary* Up to 1 MSa (16 MSa with Option MEM) with multi-segment sequencing
Operating modes & modulation types
Operating modes Continuous, modulate, frequency sweep, burst, output gate
Modulation types AM, FM, PM, FSK, BPSK, PWM, Sum (carrier + modulation)
Waveform characteristics
Frequency range 1 µHz to 20 MHz or 30 MHz, 1 µHz resolution
Amplitude flatness (spec) 1, 2
(relative to 1 kHz)
< 100 kHz: ± 0.10 dB
100 kHz to 5 MHz: ± 0.15 dB
5 to 20 MHz: ± 0.30 dB
20 to 30 MHz:** ± 0.40 dB
Harmonic distortion (typ) 2, 3 < 20 kHz: < -70 dBc
20 to 100 kHz: < -65 dBc
100 kHz to 1 MHz: < -50 dBc
1 to 20 MHz: < -40 dBc
20 to 30 MHz:** < -35 dBc
THD (typ) 20 Hz to 20 kHz: < 0.04%
Non-harmonic spurious (typ) 2, 3 Standard: < -75 dBc, increasing +20 dB/decade above 2 MHz
Option OCX: < -75 dBc, increasing +20 dB/decade above 10 MHz
(or < -100 dBm, whichever is greater, below 500 MHz)
Phase noise (SSB) (typ) Standard Option OCX
1 kHz offset: -105 -110 dBc/Hz
10 kHz offset: -115 -125 dBc/Hz
100 kHz offset: -125 -135 dBc/Hz
*Only available on 33511B/12B/21B/22B
***Only available on 33519B/20B/21B/22B
Square & pulse
Frequency range 1 µHz to 20 MHz or 30 MHz, 1 µHz resolution
Rise and fall times (nom) Square: 8.4 ns, fixed
Pulse: 8.4 ns to 1 µs, independently variable, 100-ps or 3-digit resolution
Overshoot (typ) < 2%
Duty cycle 0.01% to 99.99% 8
Pulse width 16 ns minimum, 100-ps resolution
Jitter (cycle-to-cycle, typ) < 40 ps rms
Ramp & triangle
Frequency range 1 µHz to 200 kHz, 1 µHz resolution
Ramp symmetry 0.0% to 100.0%, 0.1% resolution
(0% is negative ramp, 100% is positive ramp, 50% is Triangle)
Nonlinearity (typ) < 0.05% from 5% to 95% of the signal amplitude
Gaussian noise
Bandwidth (typ) 1 mHz to 20 MHz or 30 MHz, variable
Crest factor (nom) 4.6
Repetition period > 50 years
Pseudorandom binary sequence (PRBS)
Bit rate 1 mbps to 50 Mbps, 1 mbps resolution
Sequence length 2 m -1, m=7, 9, 11, 15, 20, 23
Rise and fall times (nom) 8.4 ns to 1 µs, variable, 100-ps or 3-digit resolution
Arbitrary waveform characteristics
Waveform length 8 Sa to 1 MSa per channel (16 MSa with Option OCX) in increments of 1 sample
Sample rate 1 µSa/s to 250 MSa/s, 1 µSa/s resolution
Voltage resolution 16 bits
Bandwidth (-3 dB, nom) Filter Off: 40 MHz
“Normal” Filter On: 0.27 x (Sample Rate)
“Step” Filter On: 0.13 x (Sample Rate)
Rise and fall time 0.35 / Bandwidth (10 ns min) with "Normal" or "Step" filter On
Settling time (typ) < 200 ns to 0.5% of final value
Jitter (typ) Filter Off: < 40 ps rms
“Normal” or “Step” filter On: < 5 ps
IQ Player Characteristics
Balance Adjust
Amplitude Gain
(channel to channel amplitude balance)
-30% to +30%
Delta Offset Ch 1 and Ch 2 ± (5 VDC - Peak AC) into 50 Ω
± (10 VDC - Peak AC) into open circuit
IQ Signal Skew
(adjusts channel to channel skew)
-4.00 ns to +4.00 ns
Amplitude vs. Time
X-Y (constellation diagram)
Waveform sequencing (Available only on 33511B/12B/21B/22B)
Operation Individual arbitrary waveforms (segments) can be combined into user-defined lists (sequences)
to form longer, more complex waveforms. Each sequence step specifies whether to repeat
the associated segment a certain number of times, to repeat it indefinitely, to repeat it until a
Trigger event occurs, or to stop and wait for a Trigger event. Additionally, the behavior of the
Sync output can be specified in each step.
To improve throughput, up to 32 sequences totalling up to 1,024 segments can be pre-loaded
into volatile memory.
Segment length 8 Sa to 1 MSa per channel (16 MSa with Option MEM) in increments of 1 sample
Sequence length 1 to 512 steps
Segment repeat count 1 to 1x10 6 , or infinite
Output characteristics
Outputs Connector shells for channel output(s), Sync, and Mod In are connected
together but isolated from the instrument’s chassis. Maximum
allowable voltage on isolated connector shells is ±42 Vpk
Signal output
Output impedance (nom) 50 Ω
On, off, inverted User-selectable for each channel
Voltage limit User-definable VMAX and VMIN limits
Overload protection Output turns off automatically when an overload is applied
Instrument will tolerate a short-circuit to ground indefinitely
Range 1 mVpp to 10 Vpp into 50 Ω
2 mVpp to 20 Vpp into open circuit
Resolution 4 digits
Units Vpp, Vrms, or dBm, selectable
Accuracy 1, 2 (spec) ±1% of setting ±1 mVpp at 1 kHz
DC offset
Range 5 ±(5 VDC - Peak AC) into 50 Ω
±(10 VDC - Peak AC) into open circuit
Resolution 4 digits
Units VDC
Accuracy 1, 2 (spec) ±1% of Offset setting ±0.25% of Amplitude setting ±2mV
Frequency accuracy
Standard frequency reference (spec)
1 year, 23° C ± 5° C ±1 ppm of setting ± 15 pHz
1 year, 0° C to 55° C ±2 ppm of setting ± 15 pHz
High-stability frequency reference (spec): Option OCX
1 year, 0° C to 55° C ±0.1 ppm of setting ± 15 pHz
Modulation types and operating modes
Carrier AM FM PM FSK BPSK PWM Sum Burst Sweep
Sine and Square  
Triangle and Ramp  
Gaussian Noise           ●a  
Single ARB*   ●b   ●b    
Sequenced ARB*              
a. Gated burst only. b. Applies to sample clock, not whole waveform.


Modulating signals
Carrier Sine Square Triangle / Ramp Noise PRBS ARB* External
Square and Pulse
Triangle and Ramp
Gaussian Noise  
* Only applies to 33511B/12B/21B/22B
Modulation characteristics
Amplitude modulation (AM)
Source Internal or external, or either channel with 2-channel models
Type Full-carrier or double-sideband suppressed-carrier
Depth 1 0% to 120%, 0.01% resolution
Frequency modulation (FM) 7
Source Internal or external, or either channel with 2-channel models
Deviation 1 µHz to 15 MHz, 1 µHz resolution
Phase modulation(PM)
Source Internal or external, or either channel with 2-channel models
Deviation 0° to 360°, 0.1° resolution
Frequency shift key modulation (FSK) 7
Source Internal timer or ext trig connector
Mark & space Any frequency within the carrier signal's range
Rate 0 Hz to 1 MHz
Binary phase shift key modulation (BPSK)
Source Internal timer or ext trig connector
Phase shift 0° to 360°, 0.1° resolution
Rate 0 Hz to 1 MHz
Pulse width modulation (PWM)
Source Internal or external, or either channel with 2-channel models
Deviation 8 0% to 100% of pulse width, 0.01% resolution
Additive modulation (Sum)
Source Internal or external, or either channel with 2-channel models
Ratio 6 0% to 100% of carrier amplitude, 0.01% resolution
Burst 9
Type Counted or gated
Count 1 to 1x10 8 cycles, or infinite
Gated Produces complete cycles while Ext Trig is asserted
Start/stop phase 4 -360° to 360°, 0.1° resolution
Trigger source Internal Timer or Ext Trig connector
Marker Adjustable to any cycle; indicated by the trailing edge of the Sync pulse
Sweep 7
Type Linear, Logarithmic, List (up to 128 user-defined frequencies)
Operation Linear and Logarithmic sweeps are characterized by a Sweep time (during which the
frequency changes smoothly from Start to Stop), a Hold time (during which the frequency
stays at the Stop frequency), and a Return time (during which the frequency changes
smoothly from Stop to Start). Returns are always linear.
Direction Up (Start freq < Stop freq) or Down (Start freq > Stop freq)
Start and stop frequencies Any frequency within the waveform's range
Sweep time Linear 1 ms to 3600 s, 1 ms resolution;
3601 s to 250,000 s, 1 s resolution
Logarithmic 1 ms to 500 s
Hold time 0 s to 3600 s, 1 ms resolution
Return time 0 s to 3600 s, 1 ms resolution
Trigger source 10 Immediate (continuous), external, single, bus, or timer
Marker Adjustable to any frequency between Start and Stop for Linear
and Logarithmic types or any frequency in the list for List type;
indicated by the trailing edge of the sync pulse
Internal timer for FSK, BPSK, BURST, and SWEEP
Range 1 µs to 8000s, 6-digit or 4 ns resolution
2-channel characteristics (Only applies to 33519B/20B/21B/22B)
Operating modes Independent, coupled parameter(s), combined (Ch 1 + Ch 2),
Equal (Ch 2 = Ch 1), or differential (Ch 2 = -Ch 1)
Parameter coupling None, frequency (ratio or difference) and/or amplitude and DC offset
Relative phase 0° to 360°, 0.1° resolution
Skew (typ) < 200 ps (when performing identical operations)
Crosstalk (typ) < -85 dB
Sync/marker output
Connector Front-panel BNC, isolated from chassis
Functions Sync, sweep marker, burst marker, or arbitrary waveform marker
Assignment Channel 1 or channel 2
Polarity Normal or inverted
Voltage level (nom) 3 Vpp into open circuit, 1.5 Vpp into 50 Ω
Output impedance (nom) 50 Ω
Minimum pulse width (nom) 16 ns
External trigger/gate
Connector Rear-panel BNC, chassis-referenced
Function Input or output
Assignment Channel 1, channel 2, or both (as input)
Channel 1 or channel 2 (as output)
Polarity Positive or negative slope
Voltage level (nom) 0 V to 0.4 V for low, > 2.3 V for high, 3.5 V maximum (as input)
3 Vpp (nom) into open circuit, 1.5 Vpp (nom) into 50 Ω (as output)
Impedance (nom) 10k Ω, DC-coupled (as input)
50 Ω (as output)
Minimum pulse width (nom) 16 ns
Input rate DC to 1 MHz
Minimum pulse width 100 ns (as input)
Duty cycle (nom) 50% (as output)
Trigger delay 0 s to 1000 s, 4 ns resolution; applies to all trigger events
Input latency (typ) < 135 ns with Trigger Delay set to zero
Input jitter (typ) < 2.5 ns, rms
Fanout ≤ 4 total Agilent 33500B Series waveform generators
Modulation input
Connector Rear-panel BNC, isolated
Assignment Channel 1, Channel 2, or both
Voltage level ±5 V full-scale
Input impedance (nom) 5k Ω
Bandwidth (-3 dB, typ) 0 Hz to 100 kHz
Frequency reference input
Connector Rear-panel BNC, isolated from chassis and all other connectors
Reference selection Internal, external, or auto
Frequency range Standard 10 MHz ± 20 Hz
Option OCX 10 MHz ± 1 Hz
Lock time (typ) <2 s
Voltage level 200 mVpp to 5 Vpp
Input Impedance (nom) 1k Ω || 20 pF, AC-coupled
Frequency reference output
Connector Rear-panel BNC, chasis-referenced
Frequency (nom) 10 MHz
Output impedance (nom) 50 Ω, AC-coupled
Level (nom) 0 dBm, 632 mVpp into 50 Ω
Real-time clock/calendar
Set and read Year, month, day, hour, minute, second
Battery CR-2032 coin-type, replacable, >5-year life (typ)
RealProgramming times (meas.)
Configuration change speed
ARB* LAN (socket) LAN (VXI-11) USB 2.0 GPIB
Change function 5 ms 6 ms 5 ms 5 ms
Change frequency 2 ms 3 ms 2 ms 3 ms
Change amplitude 20 ms 20 ms 19 ms 22 ms
Select user arb (16 k) 9 ms 11 ms 9 ms 9 ms
Arbitrary waveform download speed to volatile
(binary transfer) LAN (socket) LAN (VXI-11) USB 2.0 GPIB
4 k sample 6 ms 18 ms 8 ms 39 ms
1 M sample 1.3 s 2.6 s 13 s 9.1 s
Arbitrary waveform and instrument state memory
Volatile 1x10 6 samples per channel or 16x10 6 samples per channel (Option MEM)
512 sequence steps per channel
Non-volatile File sytem file space is limited to 64 MB
(~32 MSa of arbitrary waveform records)
Non-volatile File sytem file space is limited to 64 MB
(~32 MSa of arbitrary waveform records)
Instrument state
Store / Recall User defined instrument states
Power Off Power Off state automatically saved
Power On Factory default settings or last power off settings
USB File System
Front-panel port USB 2.0 high-speed mass storage (MSC) class device
Capability Read or write instrument configuration settings, instrument states
and user arbitrary waveform and sequence files.
Speed 10 MB/s (nom)
General characteristics
Computer interfaces
LXI- C (rev1.3) 10/100Base-T Ethernet (Sockets & VXI-11 protocol)
USB2.0 (USB-TMC488 protocol)
GPIB/IEEE-488.1, IEEE-488.2
Web user interface Remote operation and monitoring
Programming language SCPI-1999, IEEE-488.2
Agilent 33210A / 33220A compatibile
Graphical display 4.3" Color TFT WQVGA (480x272) with LED backlight
Size 261.1mm W x 103.8mm H x 303.2mm D (with bumpers installed)
212.8mm W x 88.3mm H x 272.3mm D (with bumpers removed)
2U x ½ rack width
Weight (nom) 3.3 kg (7.2 lbs)
Storage temperature -40˚C to 70˚C
Warm-up time 1 hour
Operating environment EN61010, polution degree 2; indoor locations
Operating temperature 0˚C to 55˚C
Operating humidity 5% to 80% RH, non-condensing
Operating altitude up to 3000 meters
Safety Complies with European Low Voltage Directive and carries the CE-marking.
Conforms to UL 61010-1, CSA C22.2 61010-1, and IEC 61010-1:2001
EMC Complies with European EMC Directive for test and measurement products.
- IEC/EN 61326-1
- CISPR Pub 11 Group 1, class A
- ICES/NMB-001
Complies with Australian standard and carries C-Tick mark
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme a la norme NMB-001 du Canada
Acoustic Noise (nom) SPL 35 dB(A)
Line power
Voltage 100 V - 240 V 50/60 Hz -5%, +10%
100 V - 120 V 400 Hz ±10%
Power consumption (typ) < 45 W, < 130 VA
Warranty 1 year standard.