Máy hàn sợi quang Ilsintech Swift F3, Clad to Clad

Fiber alignment: Fixed V-Groove(Clad to Clad)

Applicable type of fibers: 0.25mm, 0.9mm, 2.0mm, 3.0mm, 4.0mm Indoor cable0.25mm, 0.9mm, 2.0mm, 3.0mm, 4.0mm Indoor cable

Fiber count: Single fiber

Applicable fiber dimensions: Cladding diameter: 125㎛, Coating diameter: 250, 900㎛

Fiber setting and cleaved length: 7.0mm

Splicing modes: Splice mode: 100, Heater mode: 50

Typical Splice Loss: SM: 0.03dB, MM: 0.02dB, DS: 0.06dB, NZDS: 0.06dB

Return loss: > 60dB

Splicing time: Typical 7sec (Standard SM, SM-SM mode)

Splice loss estimate: Available

Sleeve heating time: 30sec(0.9mm fiber), 70sec(indoor, 3.0mm cable), 80sec(Connector)

Applicable protection sleeve: 40mm, 60mm, 32mm or 28mm Connector

Storage of splice result: The last 2,000 results to be stored in the internal memory.

Tension test: 1.96N

Operating condition: 
Altitude: 0~5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%,  
Wind: 15m/s, non-condensing, dust proof, water proof, shock proof

Storage condition: Temperature: -40℃~80℃, Humidity: 0~95%

Dimension: 136(W)ｘ203(L)ｘ86(H)mm

Weight: 1.35kg(Including battery 1.65kg)

Viewing method and display: Two CMOS cameras and 3.5-inch color LCD monitor

Fiber view and magnification: X/Y : 170X/190X

Power supply: DC Lithium polymer battery(DC 14.8V, 1650mAhｘ2), 100 ~ 240V AC Adapter

No. of splice cycles with battery: Typical 120 cycles

Electrode life: More than 2,500 times

Terminals: USB