Máy hiện sóng, Oscilloscope GW Instek GDS1102A-U, 100MHz, 2 CH

Name: Máy hiện sóng, Oscilloscope GW Instek GDS1102A-U, 100MHz, 2 CH
Brand: Gwinstek
SKU: GDS1102A-U
Availability: InStock
Rating: 5.00 (1 reviews)

Mã:

GDS1102A-U

0 đánh giá

Thương hiệu:

Gwinstek

Bảo hành:

N/A

Giá: Liên hệ

Đang có sẵn: Vui lòng liên hệ

Yêu cầu báo giá

Tạm thời chưa có khuyến mãi cho sản phẩm này

Hotline: 0906.988.447

Liên hệ: Hồ Chí Minh

Điện thoại: (028).3977.8269
Email: sales@lidinco.com
Địa chỉ: 487 Cộng Hòa, Phường Tân Bình, TP. Hồ Chí Minh, Việt Nam

Liên hệ: Bắc Ninh, Hà Nội

Điện thoại: (0222).730.0180
Email: bn@lidinco.com
Địa chỉ: 184 Bình Than, Phường Võ Cường, Bắc Ninh, Việt Nam

Tư vấn kĩ thuật Miễn phí
Miễn phí vận chuyển Đơn hàng trên 3 triệu

Thông số kỹ thuật

Dữ liệu đang được cập nhật

Mô tả sản phẩm
Phụ kiện

Máy hiện sóng, Oscilloscope GW Instek GDS1102A-U, 100MHz, 2 CH

Osilloscope GW Instek GDS-1102A-U băng thông 100 MHz, lấy mẫu 1 GSa/s, 2 kênh, bộ nhớ 2 Mpts/kênh, màn hình 5.7 inch.

2 Channel 100 MHz Bandwidth
1 GSa/s Real-Time Sample Rates Maximum, 25GSa/s Equivalent-Time
2 Mega Point Record Length
2mV~10V Vertical Scale
1ns~50s Horizontal Range
Up to 27 Automatic Measurements
5.7" TFT LCD Display
USB Host and Device Interface Supported
Go/NoGo Function
Data Logger
Limited Lifetime Warranty

VERTICAL
Channels	2
Bandwidth	DC~100MHz(-3dB)
Rise Time	<3.5ns Approx.
Sensitivity	2mV/div ~ 10V/div (1-2-5 increments)
Accuracy	±(3% x \|Readout\| + 0.1 div + 1mV)
Input Coupling	AC, DC & Ground
Input Impedance	1MΩ±2%, ~15pF
Polarity	Normal & Invert
Maximum Input	300V (DC+AC peak), CATII
Waveform Signal Process	+ , - , x, FFT, FFTrms ,Zoom FFT
Offset Range	2mV/div ~ 50mV/div: ±0.4V 100mV/div ~ 500mV/div: ±4V 1V/div ~ 5V/div: ±40V 10V/div: ±300V
Bandwidth Limit	20MHz (-3dB)
TRIGGER
Sources	CH1 , CH2 , Line , EXT
Modes	Auto, Normal, Single, TV, Edge, Pulse Width
Coupling	AC , DC , LF rej. , HF rej. , Noise rej.
Sensitivity	DC ~ 25MHz: Approx. 0.5div or 5mV; 25MHz ~ 70/100/150MHz: Approx. 1.5div or 15mV
EXT TRIGGER
Range	±15V
Sensitivity	DC ~ 25MHz : ~ 50mV ; 25M ~ 70/100/150MHz : ~15mV
Input Impedance	1MΩ±2% , ~ 15pF
Maximum Input	300V (DC AC peak) , CATII
HORIZONTAL
Range	1ns/div ~ 50s/div (1-2.5-5 increments); ROLL : 50ms/div ~ 50s/div
Modes	Main, Window, Window Zoom, Roll, X-Y
Accuracy	±0.01%
Pre-Trigger	10 div maximum
Post-Trigger	1000 div
X-Y MODE
X-Axis Input	Channel 1
Y-Axis Input	Channel 2
Phase Shift	±3°at 100kHz
SIGNAL ACQUISITION
Real-Time Sample Rate	1GSa/s maximum
Equivalent Sample Rate	25GSa/s maximum
Vertical Resolution	8 Bits
	2 Mega Points maximum
Acquisition Mode	Normal, Peak Detect, Average
Peak Detection	10ns (500ns/div ~ 10s/div)
Average	2 , 4 , 8 , 16 , 32 , 64 , 128 , 256
CURSORS AND MEASUREMENT
Voltage Measurement	Vpp ,Vamp ,Vavg ,Vrms ,Vhi ,Vlo ,Vmax ,Vmin ,Rise Preshoot/Overshoot ,Fall Preshoot/Overshoot
Time Measurement	Freq ,Period ,Rise Time ,Fall Time ,Positive Width ,Negative Width ,Duty Cycle
Cursors Measurement	Voltage difference between cursors (V) Time difference between cursors (T)
Auto Counter	Resolution : 6 digits Accuracy: 2% Signal Source: All available trigger source except the Video trigger mode
ADJUSTABLE PROBE COMPENSATION SIGNAL
Frequency Range	1kHz ~ 100kHz, 1kHz/STEP
Duty Cycle Range	5% ~ 95%, 5%/STEP
CONTROL PANEL FUNCTION
Autoset	Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically
Save Setup	Up to 15 sets of measurement conditions
Save Waveform	15 sets of waveform
DISPLAY
TFT LCD Type	5.7 inch
Display Resolution	234(Vertically) x 320(Horizontally) Dots
Display Graticule	8 x 10 divisions
Display Brightness	Adjustable
INTERFACE
USB Device	USB1.1 & 2.0 full speed compatible
USB Host	Image (BMP), waveform data (CSV), and setup (SET)
POWER SOURCE
Line Voltage Range	AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection
MISCELLANEOUS
Multi-Language Menu	Available
Onscreen Help	Available
DIMENSIONS & WEIGHT

User manual x 1, Power Cord x 1 Probe GTP-070A-4 or equivalent : 70MHz (10:1/1:1) Switchable passive probe for GDS-1072A-U (one per channel) Probe GTP-100A-4 or equivalent : 100MHz (10:1/1:1) Switchable passive probe for GDS-1102A-U (one per channel) Probe GTP-150A-2 or equivalent : 150MHz (10:1/1:1) Switchable passive probe for GDS-1152A-U (one per channel) Optional Accessories GSC-006 Soft carrying case GTL-110 Test lead, BNC-BNC heads GTL-242 USB 2.0 A-B type cable