CARBIDE END MILLS Allied Hight Tech 15-922F0.25, 15-922F0.5, 15-922F0.7, 15-922F1.0, 15-922F1.5, 15-922FP0.xx

CARBIDE END MILLS

  • Hãng sản xuất: Allied High Tech
  • Model: 15-922F0.25, 15-922F0.5, 15-922F0.7, 15-922F1.0, 15-922F1.5, 15-922FP0.xx
  • Bảo hành: 12 tháng

Để có giá tốt nhất và nhanh nhất, vui lòng liên hệ

(028) 3977 8269 – (028) 3601 6797

Email: sales@lidinco.com – lidinco@gmail.com

  • Mô tả
  • Thông tin bổ sung
  • DOWNLOAD

Mô tả

CARBIDE END MILLS

Made of solid carbide for maximum performance and durability, carbide end mills are used to cut metal (copper, aluminum, gold, solder, steel, NiCo), circuit board material and other non-metallics.
2-Flute end mills have deeper, longer gullets for greater chip-carrying capacity, are center cutting and are available in diameters as small as 0.25 mm.

4-Flute end mills last longer than 2-flute because wear is distributed over a greater area. They also remove material more quickly, produce finer finishes and can be moved across the sample at a higher rate.

4-Flute, Long Reach end mills feature cutting flutes that extend up from the tip approximately 3x the diameter of the tip to allow cutting into deep cavities.

15-922F0.25 Carbide End Mill – Al/Cu, 2-Flute, 0.25 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922F0.5 Carbide End Mill – Al/Cu, 2-Flute, 0.5 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922F0.7 Carbide End Mill – Al/Cu, 2-Flute, 0.7 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922F1.0 Carbide End Mill – Al/Cu, 2-Flute, 1.0 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922F1.5 Carbide End Mill – Al/Cu, 2-Flute, 1.5 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922FP0.25 Carbide End Mill – PCB, 2-Flute, 0.25 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922FP0.5 Carbide End Mill – PCB, 2-Flute, 0.5 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922FP0.7 Carbide End Mill – PCB, 2-Flute, 0.7 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922FP1.0 Carbide End Mill – PCB, 2-Flute, 1.0 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922FP1.5 Carbide End Mill – PCB, 2-Flute, 1.5 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922FP3.0 Carbide End Mill – PCB, 2-Flute, 3.0 mm Ø x 1.5” L x 3 mm shank (Pk/4)
15-922FS0.25 Carbide End Mill – Fe, 2-Flute, 0.25 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922FS0.5 Carbide End Mill – Fe, 2-Flute, 0.5 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922FS0.7 Carbide End Mill – Fe, 2-Flute, 0.7 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922FS1.0 Carbide End Mill – Fe, 2-Flute, 1 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922FS1.5 Carbide End Mill – Fe, 2-Flute, 1.5 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-922FS3.0 Carbide End Mill – Fe, 2-Flute, 3 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924F0.7-3 Carbide End Mill – Al/Cu, 4-Flute-LONG, 0.7 mm Ø x 1.5” L x 3 mm shank (Pk/4)
15-924F0.7 Carbide End Mill – Al/Cu, 4-Flute, 0.7 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924F1.0-3 Carbide End Mill – Al/Cu, 4-Flute-LONG, 1 mm Ø x 1.5” L x 3 mm shank (Pk/4)
15-924F1.0 Carbide End Mill – Al/Cu, 4-Flute, 1.0 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924F1.5-3 Carbide End Mill – Al/Cu, 4-Flute-LONG, 1.5 mm Ø x 1.5” L x 3 mm shank (Pk/4)
15-924F1.5 Carbide End Mill – Al/Cu, 4-Flute, 1.5 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924F3.0 Carbide End Mill – Al/Cu, 4-Flute, 3.0 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924FP0.7 Carbide End Mill – PCB, 4-Flute, 0.7 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924FP1.0 Carbide End Mill – PCB, 4-Flute, 1.0 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924FP1.5 Carbide End Mill – PCB, 4-Flute, 1.5 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924FP3.0 Carbide End Mill – PCB, 4-Flute, 3.0 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924FS0.7-3 Carbide End Mill – Fe, 4-Flute LONG, 0.7 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924FS0.7 Carbide End Mill – Fe, 4-Flute, 0.7 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924FS1.0-3 Carbide End Mill – Fe, 4-Flute LONG, 1 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924FS1.0 Carbide End Mill – Fe, 4-Flute, 1 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924FS1.5-3 Carbide End Mill – Fe, 4-Flute LONG, 1.5 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924FS1.5 Carbide End Mill – Fe, 4-Flute, 1.5 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)
15-924FS3.0 Carbide End Mill – Fe, 4-Flute, 3 mm D x 1.5″ (38 mm) L x 3 mm shank (Pk/4)

 

 

Thông tin bổ sung

Hãng SX

Allied High Tech

Data sheet: here