Twintex TFG 3605E, 5MHz, 02 out put Arbitrary Function Generator

Name: Twintex TFG 3605E, 5MHz, 02 out put Arbitrary Function Generator
Brand: Twintex - Taiwan
SKU: TFG-3605E
Price: 0VND VND
Availability: InStock
Rating: 0.00 (0 reviews)

SKU:

TFG-3605E

0 ratings

Brand:

Twintex - Taiwan

Warranty:

N/A

Price: Contact

Please contact to check stock

Request a quote

There are currently no promotions for this product

Hotline: +84 906 988 447

Head Office: Ho Chi Minh City

Tel: +84 2839 778 269 / 3601 6797
Email: sales@lidinco.com
Add: 487 Cong Hoa Street, Ward 15, Tan Binh Dist, HCM City, Vietnam

Office: Bac Ninh City

Tel: +84 222 730 0180
Email: bn@lidinco.com
Add: 184 Binh Than Street, Vo Cuong Ward, Bac Ninh City, Vietnam

Technical Counseling 100% Free
Free Shipping For 3.000.000vnd Order

Specification

Data is being updated

Description product
Accessories

Description

The TFG3600E series DDS arbitrary waveform generator is dual channel channel digital function generator based on DDS technology.The DDS digital function waveform generator is available with four models: 5MHz DDS Function generator, 10MHz DDS Function generator, 15MHz Function signal generator, Function generator 20MHz. The dual channel DDS function generator signal can be used as student function generator, DIY electronic kits function generator.

Features

- Max. output frequency 5MHz/10MHz/15MHz/20MHz
- 2 output channels
- 3.5-inch TFT LCD display
- Direct Digital Synthesis technology (DDS)
- Min. output amplitude 1mV (50Ω) with good stability
- Sampling rate 100MSa/s, vertical resolution 8 bit, waveform length 1024 points
- Arbitrary waveform function
- 32 built-in waveforms and 8 user-defined arbitrary waveforms
- 40 sets save & recall for panel settings
- Modulations: FM, FSK, ASK, PSK
- Frequency sweep, amplitude sweep, burst and TTL output functions
- Over voltage, over current, short circuit and reverse voltage protections
- High speed rotary dial and keypad input
- Standard RS-232 interface for PC remote control
- Standard 200MHz external frequency counter
- Optional power amplifier

Specifications:

Model	TFG-3605E	TFG-3610E	TFG-3615E	TFG-3620E
Frequency range	1μHz~5MHz	1μHz ~10MHz	1μHz ~15MHz	1μHz ~20MHz
Waveform (CHA)
Waveform types	32 pre-stored waveforms and 8 user defined arbitrary waveforms including: Sine, Square, Triangle, Ramp, Pulse etc.
Waveform length	1024 points
Vertical resolution	8 bits
Sampling rate	100MSa/s
Sine harmonic distortion	≥40dBc (≥35dBc (1MHz~20MHz)
Sine wave total distortion	≤1% (20Hz~200kHz)
Square wave	Rise/fall edge time: ≤35nsOvershoot: ≤10%Duty cycle: 1%~99%
Frequency (CHA)
Frequency range	Sine wave: 1μHz~Max.frequency Square wave: 1μHz~5MHzOther waveforms: 1μHz~1MHz
Resolution	1μHz
Accuracy	±5×10^-5
Stability	±5×10^-6/3hours
Amplitude (CHA)
Amplitude range	2mVpp~20Vpp, 1μHz~10MHz (high impedance)2mVpp~15Vpp, 10MHz~15MHz (high impedance)2mVpp~8Vpp, 15MHz~20MHz (high impedance)
Resolution	20mVpp (amplitude>2Vpp), 2mVpp (amplitude<2Vpp)
Accuracy	± (1%+2mVrms) (high impedance, RMS, frequency 1kHz)
Stability	±0.5% /3hours
Flatness	±5% (frequency of 10MHz or below ), ±10% (frequency above 10MHz)
Output impedance	50Ω
DC Offset (CHA)
Offset range	±10V (high impedance, attenuation 0 dB)
Resolution	20mVdc
Accuracy	±(1%+20mVdc)
Sweep (CHA)
Sweep type	Frequency sweep, amplitude sweep
Sweep range	Free to set starting point and end point
Sweep step	Higher than any value of the resolution
Sweep rate	10ms~60ms/step
Sweep direction	Up, Down, Up-Down
Sweep mode	Linear, logarithmic
Control mode	Auto sweep or manual sweep
Frequency Modulation (FM) (CHA)
Carrier signal	CHA waveforms
Modulation signal	Internal signal of CHB or External signal
Modulation deviation	0%~20%
Burst (CHA)
Carrier signal	CHA signal
Trigger signal	TTL_A signal
Burst counts	1~65000 cycles
Burst mode	Internal TTL, External, Single
Shift keying (CHA)
FSK	Free to set carrier waveform frequency and hopping frequency
ASK	Free to set carrier waveform amplitude and hopping amplitude
PSK	Hopping phase: 0~360°, Max. resolution: 1°
Alternative rate	10ms~60s
CHB output characteristics
Waveform	32 pre-stored waveforms and 8 user defined arbitrary waveforms including: Sine, Square, Triangle, Ramp, Pulse etc.Length: 1024 pointsSampling range : 12.5Msa/sAmplitude resolution : 8 bitsSquare wave duty cycle : 1%~99%
Frequency	Range: Sine wave: 1μHz~1MHz; Other waveforms: 1μHz~100kHzResolution: 1μHzAccuracy: ±1×10^-5
Amplitude	Range: 50mVpp~20Vpp (high impedance)Resolution: 20mVppOutput impedance : 50Ω
Burst	Carrier signal: CHB signalTrigger signal: TTL_B signalBurst count : 1~65000 cyclesBurst mode : Internal TTL, External, Single
TTL output
Waveform characteristics	Square wave, rise/fall time ≤20ns
Frequency characteristics	40mHz~1MHz
Amplitude characteristics	TTL and CMOS compatible, low4V
Frequency counter
Testing frequency range	1Hz~200MHz
Input signal amplitude	100mVpp~20Vpp
Remote control	RS-232 serial interface
Power amplifier (optional)
Max. output power	7W (8Ω), 1W (50Ω)
Max. output voltage	22Vpp
Frequency bandwidth	1Hz~200kHz
General
Operation characteristics	Key operation for all functions, menu display, rotary dial adjustment
Display	Display: TFT LCDLanguage: English, Chinese (simplified), Chinese (traditional)
Power requirements	Power Requirements: AC220V (1±10%) / AC110V (1±10%)Frequency: 50Hz/60Hz(1±5%)Power Consumption: <45VA
Environmental condition	Temperature: 0~40℃Humidity: <80%
Standard accessories	Power cord ×1, Operation manual ×1, Software CD ×1, RS-232 cable ×1,BNC-BNC cable ×1, Test lead ×1
Dimension	415×295×195mm
Weight	3.5kg