Máy hiện sóng, Oscilloscope Twintex TSO1102, 100MHz, 2 CH

Máy hiện sóng, Oscilloscope Twintex TSO1102, 100MHz, 2 CH

tick sản phẩm Thương hiệu
tick sản phẩm Mã sản phẩm
tick sản phẩm Bảo hành
  12 tháng
Để được báo giá nhanh nhất và tốt nhất vui lòng “liên hệ ngay”
√ Hotline:
√ Mail:
√ Form báo giá:
  028.3977.8269 / 028.3601.6797
  • Mô tả
  • Thông số kỹ thuật

Mô tả

Máy hiện sóng, Oscilloscope Twintex TSO1102, 100MHz, 2 CH

Máy hiện sóng Twintex TSO1102 băng thông 100 MHz, lấy mẫu 500 MSa/s, 2 kênh, bộ nhớ 2 Mpts/kênh, màn hình 7 inch


– 25MHz/60MHz/100MHz/150MHz/200MHz bandwidth
– Sampling rate up to 1Gsa/s & 500Msa/s, memory depth up to 2Mpts
– Advanced triggering: edge, pulse, video, slope, alternative
– 32 parameters auto measuring
– Save/Recall available with setups, waveforms, CSV file, pictures
– Auto setup, Run/Stop control, Menu ON/OFF button
– Unique digital filter and waveform recording function
– Multi-lingual user interface with 12 languages and context sentitive help
– 4 math functoins plus FFT
– Large internal waveform and setup storage
– Front panel print button for easy saving or printing screen shots
– Screen-saver function (1 min. to 5 hours)
– USB and RS-232 ports for direct PC remote control from, the USB port also allows for connections to printers and memory sticks


– Industrial power design, troubleshooting, installation, maintenance
– Electronics design, troubleshooting, installation, maintenance
– Circuit design & debugging
– Education and training
– Repair & service
– Production test & quality inspection


32 measuring types

Measures 32 parameters automatically. Parameters can be selected one by one and display simultaneously.

Reference waveform

Saves two sets of reference waveform and displays them simultaneously to make comparison.

FFT split display

Analyze signal in frequency area, channel waveform and FFT display simultaneously in one screen, giving direct waveform observation.

Waveform save/recall

A built-in waveform recorder facilitates seamless real-time recording of waveform. The saved waveforms can be recalled to playback.

Pass/Fail Test

The  built-in Pass/Fail testing provides signal mode for production testing, possess output OFF function, and improves testing efficiency.

Digital filter ON/OFF

Digital filtering is available on each channel and can be turned on or off. The Low-Pass, High-Pass, Band-Pass and Band-Stop filters allow you to isolate only the frequencies you want to see.

Auto measuring

The system will adjust cursor position automatically according to changes of selected auto-measuring parameter and caculate corresponding parameter values.

Independent channel control

Simple operation for independent channel control; backlit button design, clear and easy for measuring.

Delay scanning

Applies dual time base EasyZoom technology, giving perfect  display for partial and complete waveforms.

Adjustable waveform intensity

Waveform instensity can be adjusted to give easy view of waveforms.

Pop-up menu

With pop-up menu, the menu can  be hidden at any time to make full-screen display, making more convenient waveform observastion.

Context sensitive help

One-key onlie help system facilitate simple and easy learning and application of the unit. Press any button or turn any knob in help mode, a pop-up window displays the functonality of that control.



TSO 1102



Channels 2 channels + 1 external triggering channel
Real time sampling rate
Single channel


Dual channel


Equivalent sampling rate


Memory depth


Rise time


Input impedance 1MΩ‖17pF
Time base



Roll: 100ms~50s/DIV
Vertical sensitivity 2mV~10V/DIV (1-2-5 sequence)
Vertical resolution 8 bit
Trigger source CH1, CH2, EXT, EXT/5, AC line
Trigger mode Edge, Pulse, Video, Slope, Alternative
Math operation +, -, *, FFT (window mode: Hanning, Hamming, Blackman, Rectangula
           Sampling point: 1024)
Digital filter High-pass, low-pass, band-pass, band-stop
Max. input voltage 400V (DC+AC peak), CAT I
Auto set Auto adjusting the vertical, horizontal system and trigger position
Auto measuring Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean, Crms, Vrms, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Rise time, Fall time, Freq, Period, +Wid, -Wid, +Dut, -Dut, Bwid, Phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF
Internal memory Support 2 sets reference waveforms, 20 sets setups, 20 sets captured waveforms storage/recall function
External memory Support bitmap save, CSV save, waveform save, setting save USB flash driver storage
Point, vector OFF, 1 sec., 2 sec., 5 sec., Infinite
Language English, French, German, Russian, Spanish, Portuguese, Japanese, Korean, Italian, Arabic, Simplified Chinese, Traditional Chinese
Interface USB Host, USB Device, RS-232, Pass/Fail output
Display 7 inches TFT LCD, resolution: 480×234, 8x18 DIV
Safety EMC: EN61326; LVD: EN61010-1
Power source AC100-240V, 47-440Hz, 50VA Max.
Dimension 323×136×157mm
Weight 2.5kg