Bộ phân tích nguồn Tektronix (Power Analyzer) PA4000

Bộ phân tích nguồn Tektronix (Power Analyzer) PA4000

• Hãng sản xuất

Model

Bảo hành

Tektronix

PA 4000

12 tháng

Để có giá tốt nhất và nhanh nhất, vui lòng liên hệ

(08) 3977 8269 – (08) 3601 6797

Email: sales@lidinco.com – lidinco@gmail.com

  • Mô tả
  • Thông số kỹ thuật
  • Phụ kiện

Mô tả

Power Analyzer PA4000

Bộ phân tích nguồn chuyên dụng, thích hợp dùng cho phòng thí nghiệm, các thiết bị đo lường cần cung cấp nguồn chính xác, hoặc các trung tâm bảo hành, sửa chữa thiết bị điện tử, viễn thông…

Đặc Điểm Vật Lý

Dimensions

Height 13.2 cm. 5.2 in.
Width 42 cm. 16.5 in.
Depth 31 cm. 12.5 in.

Weight

Net (without lead set) 8.8 kg 19.5 lb.

Temperature

Storage -20   C to +60   C
Operating 0   C to +40   C
 
  Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.
  Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats.
  Product Area Assessed: The planning, design/development and manufacture of electronic Test and Measurement instruments.

Thông số Kỹ thuật 

Available measurements

VRMS - Volts RMS VDF - Volts Distortion Factor
ARMS - Amps RMS VTIF - Volts Telephone Influence Factor
WATT - Watts ATHD - Amps Total Harmonic Distortion
VA - Volt-Amps ADF - Amps Distortion Factor
VAR - Volt-Amps Reactive ATIF - Amps Telephone Influence Factor
FRQ - Frequency VF - Fundamental Volts rms
PF - Power factor AF - Fundamental Amps rms
VPK+ - Volts peak (positive) IMP - Impedance
VPK- - Volts peak (negative) RES - Resistance
APK+ - Amps peak (positive) REA - Reactance
APK- - Amps peak (negative) HR - Integrator time
VDC - Volts DC WHR - Watt Hours
ADC - Amps DC VAH - VA Hours
VRMN - Volts rectified mean VRH - VAr Hours
ARMN - Amps rectified mean AHR - Amp Hours
VCF - Voltage crest factor WAV - Average Watts
ACF - Current crest factor PFAV - Average Power Factor
VTHD - Volts Total Harmonic Distortion CVAR - Correction VArs

Voltage and current ranges

Voltage Ranges

2000 Vpeak, 1000 Vpeak, 500 Vpeak, 200 Vpeak, 100 Vpeak, 50 Vpeak, 20 Vpeak, 5 Vpeak, 2 Vpeak

Current Ranges (30 A Shunt)

200 Apeak, 100 Apeak, 50 Apeak, 20 Apeak, 10 Apeak, 5 Apeak, 2 Apeak, 1 Apeak, 0.5 Apeak, 0.2 Apeak, 0.1 Apeak

Current Ranges (1 A Shunt)

5 Apeak, 2 Apeak, 1 Apeak, 0.5 Apeak, 0.2 Apeak, 0.1 Apeak, 0.25 Apeak, 0.0125 Apeak, 0.005 Apeak, 0.0025 Apeak

Current Ranges (External Shunt)

3 Vpeak, 1.5 Vpeak, 0.75 Vpeak, 0.3 Vpeak, 0.15 Vpeak, 0.075 Vpeak, 0.03 Vpeak, 0.015 Vpeak, 0.0075 Vpeak

Measurement accuracy - voltage and current

Voltage Accuracy, VRMS ( 45 Hz - 850 Hz )

± 0.04% of Reading ± 0.04% of Range ± 0.02 V

Voltage Accuracy, VRMS ( 10 Hz - 45 Hz, 850 Hz - 1 MHz )

± 0.05% of Reading ± 0.05% of Range ± (0.02*F)% of Reading ± 0.02 V (typical)

Voltage Accuracy, DC

± 0.05% of Reading ± 0.1% of Range ± 0.05 V

Voltage Accuracy, Vrmn

± 0.2% of Reading ± 0.1% of Range ± 0.1 V

Effect of Common Mode (Typical)

1000 V, 60 Hz < 10 mV

100 V, 100 kHz < 50 mV

Current Accuracy, ARMS ( 45 Hz - 850 Hz )

± 0.04% of Reading ± 0.04% of Range ± (20 µV/Zext)

Current Accuracy, ARMS ( 10 Hz - 45 Hz, 850 Hz - 1 MHz )

± 0.05% of Reading ± 0.05% of Range ± (0.02*F)% of Reading ± (20 µV/Zext) (typical)

Current Accuracy, DC

± 0.05% of Reading ± 0.1% of Range ± (50 µV/Zext)

Current Accuracy, ARMS

± 0.2% of Reading ± 0.1% of Range ± (100 µV/Zext)

Measurement accuracy - power

Watts Accuracy

(VRMS acc. x ARMS x PF) ± (ARMS acc. x VRMS x PF) ± (VRMS x ARMS x cos θ -cos { θ± (Vh1ph.err. ± Ah1ph.err.)})

VA Accuracy

(VRMS acc. x ARMS) ± (ARMS acc. x VRMS )

VAR Accuracy

PF Accuracy

Cos θ -cos [ θ± ( Vh1 ph.err± Ah1 ph.err)] ± 0.001

Measurement accuracy - Harmonic magnitude and phase 1

Voltage Harmonics (45 Hz - 850 Hz) (Typical for 10 Hz to 45 Hz and 850 Hz to 1 MHz)

± 0.08% of Reading ± 0.08% of Range ± (0.02*F)% of Reading ± 0.02 V

Voltage Harmonics Phase (45 Hz - 850 Hz) (Typical for 10 Hz to 45 Hz and 850 Hz to 1 MHz)

0.025 ± [ 0.005 * Vrange / Vreading )] ± (0.1 / Vrange) ± ( 0.002 *F )

Current Harmonics (45 Hz - 850 Hz) (Typical for 10 Hz to 45 Hz and 850 Hz to 1 MHz)

± 0.08% of Reading ± 0.08% of Range ± (0.02*F)% of Reading ± (20 µV /Zext)

Current Harmonics Phase (45 Hz - 850 Hz) (Typical for 10 Hz to 45 Hz and 850 Hz to 1 MHz)

0.025 ± [0.005 * Arange / Areading)] ± (0.001 / Arange * Zext)) ± (0.002 *F)

1F is the frequency measured in kHz. In the case of harmonics, F is the harmonic frequency.

Zext is the shunt impedance (0.6 Ω for 1 A shunt, 9.375 mΩ for 30 A shunt). It is assumed that the waveform measured is a sine wave.

Measurement conditions during calibration: Instrument default settings unless otherwise stated, Sine waves applied to V and I inputs, 30 minute warm-up, Temperature 23 °C ±5 °C.

 

Accessory Description
CL1200 Current Clamp, 0.1A - 1200A
CL200 Current Clamp, 0.5A - 200A
CT-100-M Fixed-Core Current Transducer, Hall Effect, up to 100A
CT-1000-M Fixed-Core Current Transducer, Hall Effect, up to 1000A
CT-1000-S Fixed-Core Current Transducer, High Accuracy, up to 1000A (requires external power supply)
CT-200-M Fixed-Core Current Transducer, Hall Effect, up to 200A
CT-200-S Fixed-Core Current Transducer, High Accuracy, up to 200A
CT-500-M Fixed-Core Current Transducer, Hall Effect, up to 500A
CT-60-S Fixed-Core Current Transducer, High Accuracy, up to 60A