Máy hiện sóng, Oscilloscope LeCroy HDO8108 1 GHz, 8 CH

Name: Máy hiện sóng, Oscilloscope LeCroy HDO8108 1 GHz, 8 CH
Brand: LeCroy
SKU: HDO8108
Price: 0VND VND
Availability: InStock
Rating: 0.00 (0 reviews)

Mã:

HDO8108

0 đánh giá

Thương hiệu:

LeCroy

Bảo hành:

N/A

Giá: Liên hệ

Vui lòng liên hệ để kiểm tra tình trạng kho

Yêu cầu báo giá

Tạm thời chưa có khuyến mãi cho sản phẩm này

Hotline: 0906.988.447

Liên hệ: Hồ Chí Minh

Điện thoại: (028).3977.8269
Email: sales@lidinco.com
Địa chỉ: 487 Cộng Hòa, Phường 15, Quận Tân Bình, TP. HCM

Liên hệ: Bắc Ninh, Hà Nội

Điện thoại: (0222).730.0180
Email: bn@lidinco.com
Địa chỉ: 184 Bình Than, Phường Võ Cường, TP. Bắc Ninh

Tư vấn kĩ thuật Miễn phí
Miễn phí vận chuyển Đơn hàng trên 3 triệu

Thông số kỹ thuật

Dữ liệu đang được cập nhật

Mô tả sản phẩm
Phụ kiện

Giới thiệu

Máy hiện sóng LeCroy DHO8108 băng thông 1 GHz, lấy mẫu 2.5 GSa/s, 8 kênh, bộ nhớ 50 Mpts/kênh, màn hình 12.1 inch.

Key Features

8 input channels
12-bit ADC resolution, up to 15 bits with enhanced resolution
350 MHz, 500 MHz, and 1 GHz bandwidths
Long Memory - up to 250 Mpts/Ch
12.1" touch screen display
DisplayPort 1.2 video output for Ultra HD extended desktop (UHD, 3840 x 2160 pixels)
Q-Scape^TM tabbed displays
Mixed Signal capability (16 digital channels, 1.25 GS/s sample rate)
Serial data trigger and decode
Powerful analysis capabilities

8 Analog + 16 Digital Input Channels

Capture 8 analog signals plus 16 digital logic signals. Get more information in one place at one time.

HD4096 High Definition Technology

HD4096 high definition technology enables oscilloscopes to capture and display signals of up to 1 GHz with high sample rate and 16 times more resolution than other oscilloscopes.

Benefits of HD4096 Technology

Waveforms captured and displayed on oscilloscopes with HD4096 technology are cleaner and crisper. Signal details often lost in the noise are clearly visible and easy to distinguish HD4096 enables oscilloscopes to deliver unmatched measurement precision for improved debug and analysis.

Motor Drive Power Analyzer software

Provides three-phase numerical and waveform power analysis from motor drive input through motor mechanical output. Included are real, apparent, and reactive power measurements, power factor and phase angle, efficiency, and various voltage and current parameters. Both two-wattmeter and three-wattmeter methods are supported, as well as line-line to line-neutral voltage conversion. Motor speed, position, and torque integration are the most complete available. Turn your HDO8000 into a complete measurement and debug tool for the motor, motor drive, and embedded motor control system.

Q-Scape Multi-Tab Display Architecture

More waveforms requires new display architectures. Unique Q-Scape multi-tab display architecture speeds your understanding of your design with 4x the display area. Quickly move waveforms to different tabs through drag-and-drop.

Ultra HD (UHD, 3840 x 2160 pixel) Extended Desktop

Utilize the DisplayPort 1.2 video output in Extended Desktop mode to maximize display size and screen resolution. Split grids amongst the scope and external display. Purchase an external display that is touchscreen compatible and gain even more flexibility.

Powerful Analysis Capabilities

Up to 250 Mpts/ch of acquisition memory allows many seconds of data capture. Display up to 40 waveforms (12 math, 12 zoom, 12 memory) and 12 measurement parameters. Most powerful motherboard in its class - Intel Intel Core i5-4570s Quad (core), 2.9 GHz (per core), up to 32 GB of RAM.

Vertical System
Analog Bandwidth (Max)	1 GHz
Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input)	1 GHz (≥1 mV/div)
Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input)	500 MHz (typical)
Rise Time (10-90%, 50 Ω)	450 ps (typical)
Input Channels	8
Bandwidth Limiters	20MHz, 200MHz
Input Impedance	1 MΩ ± 2.0% \|\| 16 pF, 50 Ω ± 2.0%
Input Coupling	1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Maximum Input Voltage	50 Ω: 5 Vrms, 1 MΩ: 400 V max (DC + Peak AC ≤ 10 kHz)
Channel-Channel Isolation	DC-400MHz: 60 dB (>1000:1), 400MHz up to rated BW: 50 dB (>300:1), (For any two ProBus input channels, same v/div settings, typical)
Vertical Resolution	12 bits; up to 15 bits with enhanced resolution (ERES)
Sensitivity	50 Ω: 1 mV-1 V/div, fully variable; 1 MΩ: 1 mV-10 V/div, fully variable
DC Vertical Gain Accuracy (Gain Component of DC Accuracy)	±(0.5%) F.S, offset at 0 V
Offset Range	50Ω +/-1.6V: 1mV/div-4.95mV/div +/-4V: 5mV/div-9.9mV/div +/-8V: 10mV/div-19.8mV/div +/-10V: 20mV/div-1V/div1MΩ +/-1.6V: 1mV/div-4.95mV/div +/-4V: 5mV/div-9.9mV/div +/-8V: 10mV/div-19.8mV/div +/-16V: 20mV/div-100mV/div +/-80V: 102mV/div-198mV/div /-160V: 200mV/div-1V/div +/-400V: 1.02V/div-10V/div
Offset Accuracy	+/-(1.0% of offset value + 0.5%FS + 0.02% of max offset + 1mV)
DC Vertical Offset Accuracy	±(1.0% of offset setting + 0.5%FS + 0.02% of max offset + 1mV)

Horizontal System
Timebases	Internal timebase common to 8 input channels; an external clock may be applied at the auxiliary input for acquisition of channels 1-4 (channels 5-8 disabled)
Time/Division Range	20 ps/div - 5 ks/div with standard memory (up to 10 ks/div with -L memory, 25 ks/div with -XL memory); RIS available at ≤ 10 ns/div; Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s
Clock Accuracy	+/-2.5ppm + 1.0ppm/year from calibration
Trigger and Interpolator Jitter	≤ 3.5 psrms (typical) <0.1 ps RMS (typical, software assisted)
Channel-Channel Deskew Range	±9 x time/div. setting, 100 ms max., each channel
External Timebase Reference (Input)	10MHz +/-25ppm at 0 to 10dBm into 50Ohms
External Timebase Reference (Output)	10MHz, 3.5 dBm +/-1dBm, syncronized to reference being used (internal or external reference) via LBUS BNC adaptor
External Clock	DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, for acquisition of channels 1-4 (channels 5-8 disabled). Minimum rise time and amplitude requirements apply at low frequencies.

Acquisition System
Single-Shot Sample Rate/Ch	2.5 GS/s on 8 Ch
Random Interleaved Sampling (RIS)	125 GS/s, user selectable for repetitive signals (20 ps/div to 10 ns/div)
Maximum Trigger Rate	1,000,000 Triggers/sec (in Sequence Mode, up to 8 channels)
Intersegment Time	1 µs
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments)	50M/50M/50M (30,000)
Memory Options (4 Ch / 2 Ch / 1Ch) (Number of Segments)	L- Option: 100M / 100M / 100M (60,000) XL - Option: 250M / 250M / 250M (65,000)

Acquisition Processing
Averaging	Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Enhanced Resolution (ERES)	From 12.5 to 15 bits vertical resolution
Envelope (Extrema)	Envelope, floor, or roof for up to 1 million sweeps
Interpolation	Linear or Sin x/x

Triggering System
Modes	Normal, Auto, Single, and Stop
Sources	Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger)
Coupling Mode	DC, AC, HFRej, LFRej
Pre-trigger Delay	0-100% of memory size (adjustable in 1% increments of 100 ns)
Post-trigger Delay	0-10,000 Divisions in real time mode, limited at slower time/div settings or in roll mode
Hold-off by Time or Events	From 2 ns up to 20 s or from 1 to 99,999,999 events
Internal Trigger Range	±4.1 div from center (typical)
Trigger Sensitivity with Edge Trigger ProBus Inputs	0.9 division: 10 MHz 1.0 divisions: 200 MHz 1.5 divisions: 500 MHz 2.0 divisions: 1 GHz
External Trigger Sensitivity, (Edge Trigger)	2.0 div @ <1 GHz 1.5 div @ <500 MHz 1.0 div @ <200 MHz 0.9 div @ <10 MHz
Max. Trigger Frequency, SMART Trigger	1GHz
External Trigger Input Range	Ext (±0.4 V); Ext/10 (±4 V)

Basic Triggers
Edge	Triggers when signal meets slope (positive, negative, or either) and level condition.
Window	Triggers when signal exits a window defined by adjustable thresholds
TV-Composite Video	Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).

SMART Triggers
State or Edge Qualified	Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. (Note: event B pattern trigger cannot include analog channels).
Qualified First	In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. (Note: event B pattern trigger cannot include analog channels).
Dropout	Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern	Logic combination (AND, NAND, OR, NOR) of up to 9 inputs (8 channels and external trigger input). Each source can be high, low, or don't care. The High and Low level can be selected independently. Triggers at start or end of the pattern.

SMART Triggers with Exclusion Technology
Glitch	Triggers on positive or negative glitches with selectable widths. minimum width 1.5ns, Maximum Width: 20s
Width (Signal or Pattern)	Triggers on positive or negative glitches with selectable widths. minimum width 1.5ns, Maximum Width: 20s
Interval (Signal or Pattern)	Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified)	Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt	Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate	Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Exclusion Triggering	Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met

Low Speed Serial Protocol Triggering (Optional)
Optionally available	I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, MIL-STD-1553, AudioBus (I2S, LJ, RJ, TDM), USB1.x/2.0

Measurement Trigger
Measurement Trigger Capability	Select from a large number of measurement parameters. Trigger on a measurement value with qualified limits.

Color Waveform Display
Type	Color 12.1" widescreen flat panel TFT-Active Matrix with high resolution touch screen
Resolution	WXGA; 1280 x 800 pixels.
Number of traces	Display a maximum of 40 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles	Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y, Tandem, Quattro, Twelve, Sixteen
Waveform Representation	Sample dots joined, or sample dots only

Internal Waveform Memory
Internal Waveform Memory	12 active waveform memory traces (M1-M12) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.

Integrated Second Display
Type	Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver)
Resolution	Up to Ultra HD (UHD) 3840 x 2160 pixels using DisplayPort 1.2 output

Analog Persistence Display
Analog and Color-Graded Persistence	Variable saturation levels; stores each trace's persistence data in memory
Persistence Types	Select analog, color, or three-dimensional
Trace Selection	Activate persistence on all or any combination of traces
Persistence Aging	Select from 500 ms to infinity
Sweep Display Modes	All accumulated, or all accumulated with last trace highlighted

High Speed Digitizer Output (Option)
Type	0
Transfer Rate	0
Output Protocol	0
Control Protocol	0
Command Set	0

Processor/CPU
Type	Intel® CoreTM i5-4570S Quad, 2.9 GHz (3.6 GHz in turbo mode) (or better)
Processor Memory	8 GB standard for standard memory (50 Mpt) with 32 GB optional. 32 GB standard for -L and -VL memory options.
Operating System	Microsoft Windows® 7 Pro 64 bit Embedded
Real Time Clock	Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.

Zoom Expansion Traces
Zoom Expansion Traces	Display up to 12 Zoom and 12 Math/Zoom traces

Setup Storage
Front Panel and Instrument Status	Store to the internal hard drive, over the network, or to a USB-connected peripheral device.

Interface
Remote Control	Via Windows Automation, or via LeCroy Remote Command Set
GPIB Port	Supports IEEE - 488.2 (External)
LSIB Port (optional)	0
Ethernet Port	Supports 2 10/100/1000BaseT Ethernet interface (RJ45 ports)
USB Ports	Minimum 6 total: 2 front panel USB2.0 and 4 rear-mounted USB3.0 support Windows compatible devices
USB Device Port	1 USBTMC port
External Monitor Port	DisplayPort 1.2 compatible to support customer-supplied external monitor. Includes support for extended desktop operation with Ultra HD (UHD) 3840 x 2160 pixel resolution and split-grid capability on external monitor. Supports touch screen integration of external monitor (Note: external display can not use a Fujitsu touch-screen driver).
Serial Port	0

Auxiliary Input
Signal Types	Select External Trigger or External Clock Input on the front panel
Coupling	50 Ω: DC; 1 MΩ: AC, DC, GND
Max. Input Voltage	50 Ω: 5 Vrms; 1 MΩ: 400 Vmax (DC + Peak AC ≤ 5 kHz)

Auxiliary Output
Signal Types	Select from control signals or Off
Output Signal	500 Hz-1 MHz square wave or DC level; 50 mV-1 V into 1 MΩ
Control Signals	Trigger enabled, trigger out, pass/fail status, off
Connector Type	BNC, located on rear panel

Automatic Setup
Auto Setup	Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
Find Vertical Scale	Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range

Probes
Probes	Qty. (4) ÷10 Passive Probes
Probe System	ProBus. Automatically detects and supports a variety of compatible probes
Scale Factors	Automatically or manually selected depending on probe used
Calibration Output	Default is 1kHz square wave, 1Vp-p (typical), output to probe hook. Settable from 250 Hz to 1 MHz square wave; 50 mV to 1.0V.

Power Requirements
Voltage	100-240 VAC ±10% at 45-66 Hz; 110-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection; Installation Category 300 V CAT II
Nominal Power Consumption	400 W / 420 VA
Max. Power Consumption	550 W / 570 VA (with all PC peripherals and active probes connected to 8 channels)

Environmental and Safety
Temperature (Operating)	+5 °C to +40 °C
Temperature (Non-Operating)	-20 °C to +60 °C
Humidity (Operating)	5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
Humidity (Non-Operating)	5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating)	Up to 10,000 ft. (3048 m) at or below +25 °C
Altitude (Non-Operating)	Up to 40,000 ft. (12,192 m)
Random Vibration (Operating)	0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
Random Vibration (Non-Operating)	2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
Functional Shock	30 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total

Physical Dimensions
Dimensions (HWD)	14.72"H x 16.41"W x 11"D (374 mm x 417 mm x 280 mm)
Weight	12.27 kg. (27 lbs.)