Programmable DC Electronic Load Itech IT8500G+ series

Description IT8500G+ series

The IT8500G+ series is a programmable DC electronic load is specifically designed for high-precision ripple testing, with a sampling bandwidth of up to 300kHz. With the built-in ripple test function, it’s easy to measure voltage and current ripple of the DUT. IT8500G+ has built in as many as 8 fast charging protocols, meeting the test requirement of fast charging adapters, power banks, fast charging power banks and other products. At the same time, it also has other functions like automatic testing, battery discharge testing, dynamic testing, etc. So it can complete most of the performance testing of switching power supplies, batteries and other product during the development and production stages.

Product Features IT8500G+ series

♦ 7 operating modes: ：CC/CV/CR/CW/CR+CC/CV+CC/CR-LED
♦ Built-in voltage ripple and current ripple measurement function
♦ Built in 8 fast charging communication protocol, including QC2.0, QC3.0, PE+, PE2.0+, USB PD2.0, USB PD3.0, FCP, SCP, support fast charging device testing *1
♦ Dynamic mode up to 20kHz
♦ Measurement resolution up to 0.1mV / 0.1mA
♦ Professional multi-channel mode, which can cascade up to 16 devices to reduce the cost of burn-in testing
♦ OPP/OCP test functions, suitable for power module protection function test
♦ Battery discharge mode, providing three cut-off conditions of time, voltage and capacity
♦ Automatic test function, widely used in adapter test
♦ List function, which can simulate complex current carrier waveforms
♦ Current monitoring function, without expensive current probe, easy to realize current waveform monitoring (0-10V)
♦ Short-circuit mode/Measure function
*1 This function is only available in IT8511G+

Specifications