Hot Air Drying Chamber Haida HD-708-1
Hotline: +84 906 988 447
Head Office: Ho Chi Minh City
- Tel: +84 2839 778 269 / 3601 6797
- Email: sales@lidinco.com
- Add: 487 Cong Hoa Street, Ward 15, Tan Binh Dist, HCM City, Vietnam
Office: Bac Ninh City
- Tel: +84 222 730 0180
- Email: bn@lidinco.com
- Add: 184 Binh Than Street, Vo Cuong Ward, Bac Ninh City, Vietnam
- Technical Counseling 100% Free
- Free Shipping For 3.000.000vnd Order
Data is being updated
Description
Hot Air Drying Chamber is suitable for electronic, petroleum, mining, medicine, machinery manufacturing, etc. Products of drum wind drying and heat treatment. This series product is safe, energy saving, thermal insulation performance is good, the drying oven temperature uniformity is good, simple installation, convenient maintenance, etc.
Hot Air Drying Chamber Structure
1.1 Hot Air Drying Chamber adopts monolithic, thermal insulation layer is made of high quality mineral wool, shell, hot air circulation device, electric control cabinet on the right side of the oven is convenient for operation, drying cabinet equipped with new air in and out of port, the cabinet ventilation duct and hot air circulation fan, drying the casing.
1.2 Case material: body skeleton adopts 40 x 40 mm Angle steel welded together, enclosure wall material is 0.8 mm thick stainless steel plate; Wind layer is made of thick 1 (SPCC) cold rolling steel plate, the outer wall material is 1 mm cold rolled high carbon steel, body surface coating light gray paint.
1.3 Thermal insulation material: high quality mineral wool, the thickness of the insulation layer design requirements to ensure that the oven in the rated operating temperature range, casing outer wall temperature at room temperature + 25 °C or less; > 100 mm insulation layer thickness of insulating layer at the bottom of the oven about 80 mm.
1.4 Door sealing strip:High temperature resistant asbestos rope seal
1.5 The door is:Design to open the door and the door is manual flat open, the door is steel structure steel and precision of high qualified steel plate assembly welding and into.
1.6 The door is sealed:USES the manual of the rod handle and the door is the soft edge sealing device, pressure can make the door and enclosure, make sure remain the state of closed box in the process of production, to eliminate the hot gases to escape, improved working environment, guarantee the box temperature uniformity and enhance energy saving effect.
1.7 The wind but I:Wind but made of 0.8 mm thick stainless steel plate surface blunt D13 holes, is used to control the air flow, to improve the drying oven temperature uniformity.
Specification
Equipment model | HD – 708 Hot Air Drying Chamber |
Drying oven work size | Deep 960 (L) x width1760 (W) x 1420 mm (H) |
Drying oven outside diameter size
| Deep 1200 (L) x width 2200(W) x 1860 mm (H)
|
The rated power | Three phase four wire, 380 v, 50 hz |
The highest working temperature | 300°C |
Using the temperature | Room temperature + 10 ~ 300 °C can be arbitrarily set |
Heating zones | 1 zone |
Heating element connection | Y |
Heating power | 24 kw |
The temperature control mode | Using digital intelligent microcomputer PLD temperature control system. |
Temperature control precision | ±1°C |
Outer furnace wall temperature | Temperature 35 °C or less |
Drying oven door way | Manually turn |
Hot air circulation fan | 370 w x 1 |
Accessories
Please login to write review!