2 Door Lithium battery safety cabinet Ecosafe S804+LI

COMPLIANCE

• Non-flammable insulating panels, classified A1 according to NF EN ISO 1182, between the walls.
• Fireproof construction certified EI 15 min type A1, according to NF EN 13501-1.
• Standardized warning labels in accordance to ISO 3864, ISO 7010 and NF X08.003, and to European Directive 92/58/EEC.

CONSTRUCTION

• Double wall 12/10 steel construction.
• Mineral fibre insulation 20 mm thick in accordance to NF EN ISO 1182.
• White epoxy paint RAL 9010.
• Adjustable retention shelves on racks. 

VENTILATION

All cabinet models are equipped with ventilation holes, allowing them to be connected to a ventilation system. Forced ventilation is strongly recommended to avoid internal heat build-up or stagnation of vapours in case of electrolyte leakage. This can be connected either to an external outlet or to a ventilation or filter box.

OPTIONS

• Perforated shelves with 50 KG load capacity (Ref. E04LI or E06LI) 
• Removable Containment sump at the bottom (Ref. GL04 or GL06)
• Fire extinguisher automatically triggered at 79°C by special lithium thermal bulb (Ref. EX100LI, EX200LI or EX500LI) (by smoke detection if included in the VIG190 / VIG290 / VIG590).
• Rack of 9 electrical sockets for recharging batteries (Ref. PRISELI / see the chart by country)
• Drilling in the lower part for cable passage with fireproof cable (Ref. PEXTBALI50 )

EQUIPMENTS

• Ventilation by means of a lateral inner duct with opening at the top and bottom (Ø 100 mm). 
• Roof ventilation outlet with connection sleeve (Ø 100 mm). 
• Hinged doors with reinforced hinges with manual closing.
• Two-point locking. • Key lock.