Tiếng Việt 
English 
Measurement Equipment
Power Supply, Power Source
Analyzer Equipment
Enviromental Tester
Precision Measurement
Telecommunication Equipment
Precision Mechanical Equipment
Manufacturing Equipment
Education Training Kits
SMT Equipment
Other Product
DC Power Supply Rohde & Schwarz HMC8043-G, 3 channel, 32V/3A
Hotline: +84 906 988 447
Head Office: Ho Chi Minh City
- Tel: +84 2839 778 269 / 3601 6797
- Email: sales@lidinco.com
- Add: 487 Cong Hoa Street, Tan Binh Ward, Ho Chi Minh City, Vietnam
Office: Bac Ninh City
- Tel: +84 222 730 0180
- Email: bn@lidinco.com
- Add: 184 Binh Than Street, Vo Cuong Ward, Bac Ninh, Vietnam
-
Technical Counseling
100% Free
-
Free Shipping
For 3.000.000vnd Order
Specification
Data is being updated
Description
DC Power Supply Rohde & Schwarz HMC8043, 3 channel, 0V to 32V/3A, 99W, resolution 1mV/0.1mA, tracking, EasyArb, electronic fuse, FuseLink, USB stick connect, Ethernet/USB
Features
- Realtime voltage, current and power values
- High setting and readback resolution
- Low residual ripple due to linear postregulation
- High energy efficiency, low heat dissipation and quiet fans
- Convenient parallel and serial operation via V/I tracking
- Overvoltage and overpower protection (OVP, OPP) for all outputs
- FuseLink: individual channel combination of electronic fuses
- EasyArb function for user-definable V/I curves
- EasyRamp for simulating a start-up curve
- Sequencing (sequenced start of channels)
- Energy meter (measurement of energy output)
- Data logging to USB flash drive in CSV format
| R&S®HMC8043,R&S®HM8042, R&S®HMC8041 Power Supplies | |
| The specifications are based on a 30 min warm-up period. | |
| Electrical Specifications | |
| Total power output | 100W |
| Maximum power per Channel | |
| R&S®HMC8043 | 33W |
| R&S®HMC8042 50W | |
| R&S®HMC8041 | 100W |
| Voltage Output | 0-32V |
| Current Output | |
| R&S®HMC8043 | 3A max (power limit) |
| R&S®HMC8042 | 5A max |
| R&S®HMC8041 | 10A max |
| Number of outputs | |
| R&S®HMC8043 | 3 |
| R&S®HMC8042 | 2 |
| R&S®HMC8041 | 1 |
| Line & load regulation (Sense connected) | |
| Constant voltage | |
| R&S®HMC8043 | <0.02% + 3mV |
| R&S®HMC8042 | <0.03% + 5mV |
| R&S®HMC8041 | <0.03% + 5mV |
| Constant Current | |
| R&S®HMC8043 | <0.03% 200μA |
| R&S®HMC8042 | <0.03% 200μA |
| R&S®HMC8041 | <0.03% 200μA |
| Voltage ripple 20Hz to 20MHz(Front connector) | 450μV rms/ 4mVpp |
| Current ripple 20Hz to 20Mhz | typ. <1mArms |
| Response time(10%...90% load change) | 1ms (±20mV) |
| Remote Sense max. voltage | 1V |
| Programming accuracy (23° C ±5° C) | |
| voltage | all models: <0.05% +2mV |
| current | |
| R&S®HMC8043 | 0.05% +2mA |
| R&S®HMC8042/41 | 0.1% +5mA |
| Readback accuracy (23° C ± 5° C) | |
| voltage all models | <0.05%+2mV |
| current | |
| R&S®HMC8043 | 0.05% +2mA |
| R&S®HMC8042 | 0.05% +7mA |
| R&S®HMC8041 | 0.05% +4mA |
| Resolution | |
| voltage | 1mV |
| current | 0.1mA (I<1A) 1mA (I>=1A) |
| Voltage to earth | 250VDC |
| Reverse Voltage | 33V max. |
| Inverse Voltage | 0.4V max. |
| Max. current allowed in case of inverse voltage | 3A |
| Supplemental characteristics | |
| Front connectors | m4 mm saftey sockets |
| Rear connectors | Wago male connector (713-1428/037-000), 8x2-pole, pin spacing 3.5 mm / 0.138 in |
| Temperature coefficient for 12 months (per K)±(% of output + offset) | voltage: >0,02% +3mV current: >0,02%+3mA |
| Output voltage overshoot during turn-off of AC power and channel output on | 100mV |
| Over temperature protection | Yes |
| Voltage programming speed (within 1 % of total excursion) | |
| Positive voltage change | |
| no load | 10ms + μC-time |
| with resistive load | 10ms + μC-time |
| Negative voltage change | |
| no load | 500ms + μC-time |
| with resistive load | 10ms + μC-time |
| Command processing time | <30ms |
| Over Voltage Protection | Yes |
| Over Power Protection | Yes |
| Energiemeter | Yes |
| EasyRamp | Yes |
| EasyRamp time | 10ms ... 10s |
| Electronic Fuse | |
| Fuse trip time | <100us |
| Fuse linking | <100us + trip time of linked channel |
| Fuse delay | 10ms ... 10s |
| Analog Interface | |
| Shunt resistance 4...20mA | 250 Ohm |
| Input resistance 0...10V | >10 kOhm |
| Update rate V/I interface | 10 changes/sec |
| Response time V/I interface | <150ms |
| Trigger level | TTL |
| Trigger response time | <1ms |
| Resolution | 14 bit |
| Arbitrary (EasyARB) | |
| Parameter | Voltage, current, time and interpolation mode |
| Number of Points | 512 |
| Dwell time | 10ms ... 10min |
| Repetition rate | continous or burst mode with 1...255 repetitions |
| Trigger | manually, interface or trigger input |
| Logging | |
| Sampling speed | 1000,100,10,1...3600 Sa/s |
| Resolution ¸HMC8043 | 1mV / 0.1mA (<100Sa/s); 10mV / 1mA (1000Sa/s) |
| Resolution ¸HMC8042/41 | 1mV / 1mA (<100Sa/s); 10mV / 10mA (1000Sa/s) |
| Memory | Internal memory and External memory(USB-Stick) |
| Maximum number of Points | limited by memory |
| Sequencing | |
| Synchronicity | <100us |
| Delay per channel | 1ms ... 60s |
| Remote interfaces | USB-TMC, USB-CDC (Virtual COM), LAN(LXI), GPIB (optional) |
| Miscellaneous | |
| Input power option | 100-240 VAC +/-10% 50/60 Hz |
| Maximum input power | 200W |
| Fuse | T3, 15L 250V |
| Operating temperature | +0°C ..+40°C |
| Storage temperature | -20°C..+70°C |
| Humidity | 5...80% |
| Display | 3,5” / QVGA |
| Dimensions (H x W x D) | 222 x 88 x 280 mm |
| Rack mount capability 1/2 19“ | Yes |
| Weight | 2,6kg |
- Line cord
- Printed operating manual
- Software-CD
Accessories
- Line cord
- Printed operating manual
- Software-CD
Reviews & Comments
Please login to write review!
0906.988.447
Tư vấn zalo