HV-KIT-II-ESD, HANDI-VAC™ Vacuum Tweezer Kit With 5 Probes

Description

HANDI-VAC™ KIT, ESD-SAFE High-Temp Conductive Silicone, with (3) bent probes, (2) straight probes and (5) conductive silicone vacuum cups; 1/8″ (3.18mm), 3/16″ (4.76mm), 1/4″ (6.35mm), 3/8″ (9.53mm) and 1/2″ (12.70mm).

Our HANDI-VAC™ kits are a low cost pick-and-place tool that can go in everybody’s tool box. These tools are simple to operate:
1.    Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place.  Put the probe snuggly on the tip of the HANDI-VAC™ tool.  Make sure that there is no dust on the rubber vacuum tip.  NOTE: Our larger rubber vacuum cups can be placed directly on the HANDI-VAC™ tip without using a probe.
2.    Gently squeeze the HANDI-VAC™ bulb, place the soft suction cup squarely on the pick-and place part, then relax your squeeze. The part is now firmly gripped.
3.    Move the part to where you need it and a second squeeze of the bulb releases the part.

Applications for this tool include SMT parts, metal parts, plastic parts or any item having a smooth-nonporous-surface that the rubber VACUUM TWEEZER™ tip can seal against.  This tool can be used with any of our rubber vacuum cups ranging in size from 3/32” (2.38mm) to 3/4” (19.05mm) in diameter.  Use the larger cups to pick up larger and heavier parts.   For better precision in part placement see our PEN-VAC™ or PEN-VAC™ PRO-Series self contained vacuum pens.