Measurement Microphone set PLACID PMP40-1A class 2

Description

The PLACID PMP40-1B is a high-precision condenser microphone manufactured in compliance with the IEC 61094-4
requirements and classified as a class 2 microphone set.

The PMP40-1B microphone set is optimized for free-field measurements and usage in microphone arrays and impedance tubes.
As all PLACID microphones, the PMP40-1B comes with an individually calibration certificate.

Connectivity
 The PLACID PMP40-1B microphone requires a standardized BNC preamplifier attached to a 7 mm that does not need polarization. 

Uses 
The PMP40-1B is a robust and stable microphone set and is being used as an all round free field microphone suitable for laboratory as well as field jobs. The set's design is optimized for usage with arrays.

Daily usage
PLACID recommends calibration before and after each measurement with a calibrator

Quality
All PLACID microphones are made of highquality materials that will ensure long stability and durability. The microphone diaphragm, body, and protection grid are made of high-grade stainless steel, which makes the microphone resistant to physical damage. PLACID offers 2 years warranty against defective materials and workmanship.

Specification

Class / type: 2

Polarization: 0 V

Frequency range: 20 Hz to 20 kHz

Dynamic range: 30 – 126 dB(A)

Nominal Sensitivity: 50 mV/Pa

Temperature range, operation: -30 – 75 Celsius

IEC 61094 Designation: WS3F Class 2

Humidity operating Range: 0 to 90 % RH

Ventilation: Rear

Weight: 9.2 grams

Height: 65 mm

Diameter: 7 mm