Soldering Irons Solomon SL-089Soldering Irons Solomon SL-089
Mỏ hàn chạy pin Solomon SL-089 1Mỏ hàn chạy pin Solomon SL-089 1
Mỏ hàn chạy pin Solomon SL-089Mỏ hàn chạy pin Solomon SL-089

Soldering Irons Solomon SL-089

430,000 

• Manufacturer

• Model

• Warranty

Solomon

SL-089

12 months

Please call us to get the best price and service

(08) 3977 8269 – (08) 3601 6797

Email: sales@lidinco.com – lidinco@gmail.com

  • Description
  • Specifications

Description

Soldering Irons Solomon SL-089

SL-089

Battery Operated Soldering Iron

  • This portable soldering iron is operated by means of 3×1.5V size AA batteries.

Safety Notes

  • Place the protective cover over the tip when storing such that the cover secures the slide switch in the “OFF” position.
  • Tip is hot, Do not touch, Do not immerse in water
  • After using the soldering iron, cool the iron naturally before storing away.
  • Always switch off the soldering iron after use by sliding the switch to the “OFF” position

Safety Notes

  • Slide the battery cover open at the end of the soldering iron.
  • Place 3×1.5V size AA alkaline batteries into the iron as illustrated and replace cover.
  • Remove the protective cover at the tip
  • Make sure tip is securely installed
  • Slide the On/Off switch to the “ON” position
  • Hold the soldering iron like a pen
  • Press the round button on top of the On/Off switch continuously for approx. 15 seconds
  • The tip should reach working temperature
  • To save power, only press button when actually soldering
  • The hot soldering iron should be placed standing upright with the tip pointing up when not in use to avoid contacting the surrounding
  • After soldering , slide the switch to the “OFF” position, replace the protective cover

Maintenance

  • If it takes more than 30 seconds to reach working temperature, replace the batteries
  • Use alkaline batteries for best results. Do not mix old and new batteries.
  • With 3 new batteries, this soldering iron can operate continuously for approx. 60 minutes.
  • Do not change the soldering tip when hot, Use the tip exchanger provided to remove the tip as shown
  • the soldering tip is iron-plated long life tip an therefore do not file the tip.
  • If the soldering iron is not to be used for a long period of time, remove the batteries from the soldering iron.
Model Weight Heater Packing Measure Cuft
SL-089 86g
without batteries
6W
4.5V
50PCS 2.2'