Nhíp độ chính xác cao 8

Nhíp độ chính xác cao 8

Danh mục:
  • Mô tả

Mô tả

Nhíp độ chính xác cao 8, chống ăn mòn, độ dẻo dai cao sử dụng trong linh kiện điện tử, ngành y tế, kim hoàn

Vui lòng liên hệ  08 36016797 hoặc 08 39778269 để có giá nhanh nhất và tốt nhất:

  8 length 4 3/4”  120 mm, width 0.4”  10 mm
Strong flat for straightening wiresAnti-Magnetic Anti-Acid Stainless Steel


General Notes

  • low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L)
  • contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements
  • non-magnetizable
  • good corrosion resistance to most chemicals, salts and acids
  • generally used where corrosion resistance and toughness are primary requirements
  • typical applications include tweezers for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments


Component Wt.% Component Wt.% Component Wt.%
C ≤0.03 Si ≤1.0 Mn ≤2.0
P ≤0.045 S ≤0.03 Cr 17.0-19.0
Mo 2.5-3.0 Ni 12.5-15.0    

Mechanical properties:

State annealed
Density 8.0 g/cm³
hardness HB30 ≤215
Hardness Rockwell B 79
Tensile strength, ultimate 500-700 MPa
Tensile strength, yield 290
0.2% Yield stress ≤200 MPa
Elongation, break 40%
Modulus of elasticity 200 GPa

Thermal properties

Coef. of lin. therm expansion 16.0 E-6/°C 20°C-100°C
Coef. of lin. therm expansion 17.0 E-6/°C 20°C-300°C
Specific heat capacity: 0.50 J/(g·K)  
Thermal conductivity: 15W/(m·K)  
Continuos use temperature: 350°C  
Max service temperature, ait 925°C  

Electrical properties

Resistivity 0.75 E-4 Ohm.cm